User manual SONY VGP-PRTX1

[. . . ] only peripherals (computer input/output devices , terminals , printers , etc. ) that comply with FCC Class B limits, may be attached to this computer product. Operation with non-compliant peripherals is likely to result in interference to radio and television reception. [. . . ] When transporting the unit, prevent foreign objects from causing a malfunction by using the battery pack, the connector covers and the supplied slot protectors if there is any. When transporting your notebook computer, be sure to remove the unit first. Moving your notebook with the unit installed could cause the unit to fall off, resulting in personal injury, or damage to the unit or your notebook. If there are any dust or dirt particles on the port replicator connector, your notebook computer may not be able to detect the port replicator when it is connected (even if the particles are invisible to the eye). If the connection seems to be poor, remove the AC power adapter and battery and wipe off the connector and the area around it on both the notebook computer and port replicator. Commercial air dusters are also effective for blowing away residual dust and dirt. Be careful not to damage the connectors while cleaning them. : 858-942-2230 This phone number is for FCC-related matters only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Température de service 5°C à 35°C (41°F à 95°F) (gradient de température inférieur à 10°C (18°F) heure) Humidité de service 20% à 80% (sans condensation), à condition que le taux d'humidité soit inférieur à 65% pour une température de 35°C (95°F) (lecture hygrométrique à moins de 29°C (84°F)) Température de stockage ­20°C à 60°C (­4°F à 140°F) (gradient de température inférieur à 10°C (18°F)/heure) Humidité de stockage 10% à 90% (sans condensation), à condition que le taux d'humidité soit inférieur à 20% pour une température de 60°C (140°F) (lecture hygrométrique à moins 35°C (95°F)) Dimensions Approx. This Class B digital apparatus complies with Canadian ICES-003. Before using the port replicator, please read this manual thoroughly and retain it for future reference. See also the manuals provided with your notebook for more information about connecting the port replicator. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference using one or more of the following measures: Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to 140°F (­20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) Dimensions Approx. [. . . ]