User manual SONY VGP-WMS20

[. . . ] Perform this procedure with the receiver connected. Computers with the Windows XP operating system Operating temperature 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) Operating humidity 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) Storage temperature ­4°F to 140°F (­20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C) Accessories Wireless receiver (VGP-WRC4) (1) Manganese IEC R6 (size AA) battery (for testing purposes) (1)*3 Operating Instructions (this document) (1) Warranty Card (1) *1 This unit does not support communication with wireless LAN and Bluetooth®. You can use the mouse longer by using alkaline battery. Design and specifications are subject to change without notice. [. . . ] In this manual, the TM or ® marks are not specified. In this manual, Microsoft® Windows® XP Home Edition and Microsoft® Windows® XP Professional are referred to as Windows XP. If the USB wake-up function is set on your computer, it may recover from standby mode if the mouse is touched unintentionally or it is exposed to a vibration or shock. To avoid this, disconnect the receiver from your computer before entering standby mode. C If the low battery lamp flashes red, the battery may be exhausted. C Communication between the mouse and receiver may not have been properly established. If the CONNECT button on the mouse is not pressed within 15 seconds of pressing the CONNECT button on the receiver, the receiver cancels communication. C If the mouse is too far from the receiver, communication is not possible. The maximum distance between the mouse and receiver is about 32 feet (10 m). If used on a metal table or if there are obstacles between the mouse and receiver, the usable distance may be less. The scrolling features do not work with the program I am using. C The scrolling features work only with programs that use scroll bars. C Disconnect the receiver from the USB connector, wait a few seconds, and then connect the receiver again. The pointer doesn't move when I move the mouse. C Windows or other software processes may temporarily disable the mouse. In this case, you may need to wait for the processing to finish before using the mouse. C You may find some useful solutions in your computer's operating manual. C Perform steps 2 and 3 of "Connecting the mouse with the receiver" to ensure that proper communication is possible. C In some operating environments, the usable distance may be notably shorter, preventing normal operation. Should this occur, ensure the mouse is not being operated close to other electronic devices such as other computers or displays. [. . . ] When the low battery lamp flashes red, the remaining battery is low. When the battery is replaced, the low battery lamp will stop flashing and the mouse icon will return to normal. The CONNECT lamp lights up orange, and the mouse will be recognized after about 15 seconds. The zoom function does not work when I rotate the wheel button. [. . . ]