User manual SONY VMU1000

[. . . ] Connect one end to the Ethernet connector on the DLS computer and the other end to your cable or DSL modem. Wireless Network: Connect WLAN antenna to the system. Launch Marvell Client Utility Application. Select "station" as the operation mode. [. . . ] The following screen appears. Resolution Setup + If your sound system has two channels, use the LINE OUT (L) (R) on the back panel of the DLS computer and the LINE IN audio composite connectors on your speakers. Sony Registration Please complete all information to register your Sony product. This makes it easier to keep your products updated and obtain technical support, if necessary. Note: Once you complete Windows Setup and Sony Registration, do the following: Step 5: If your sound system has more than two channels, use the supplied Optical S/PDIF cable and connect one end to the S/PDIF Optical OUT connector on the back panel of the DLS computer and connect the other end to the OPTICAL IN connecter on your sound system. Note: An optical/coaxial connection will provide a higher quality output than a composite connection. Turning Power On Turn power on to the Media Changer/Recorder. i. LINK® Cable (6pin-S400) Make sure all hardware is connected and that power cables are plugged into properly grounded electrical outlets. (three prong outlets) Check the picture quality of your TV or monitor. If it is not correct, go to Step 7 Resolution Setup. If Media Center automatically opens, and you need to adjust your picture quality, minimize Media Center and go to Step 7 Resolution Setup. When complete return to Media Center Setup. Turn on the power to the computer, TV, and speakers. Warning: Do not turn on the power to the Media Changer/Recorder at this time. (See Step 6) Note: If your TV has a HDMI connector and a DVI-D connector, Sony recommends using the HDMI connector. Note: The HDMI cable carries both video and audio signals. To eject discs from Media Center: 1 From the Media Center Start menu, go to More Programs and select Manage Discs. 2 From the list, select the Eject button for each disc you wish to eject. To eject discs manually: 1 Press the Eject button on the Media Changer one time to eject the last inserted disc. or 2 Press the Eject button on the Media Changer two times to eject all discs in the changer slots. Note: This will not eject a disc in the changer's drive. You must go to Media Center, then to More Programs and select Manage Discs. Finally, select the Eject button to eject the disc from the changer's drive. Supported media types include: CD-R, CD-RW, DVD±R/RW, DVD+R DL, Double Layer media, Redbook Audio CDs, Movie DVDs (U. S. is default) Unsupported media types include: All other media types (Do not insert Blu-ray, mini-DVDs, odd-shaped discs, etc. ) Warning: Do not insert discs backwards into the Media Changer/Recorder. When inserting a disc, the label faces to the right of the slot. Do not insert unsupported media types into the Media Changer/Recorder. Inserting a nonstandard-sized or -shaped disc into a drive that is not designed to accommodate it may damage the drive. [. . . ] Do not attempt to move the Media Changer/Recorder if there are discs inside. Remove all discs before moving. VAIO Support Central ® Provides you with a single location for all of your support needs and allows you to easily access valuable support and technical information from Sony® and Microsoft®. Keep your VAIO® computer's system software and operating system updated using VAIO Web Support and Microsoft Update. Note: You must be connected to the Internet to access some of the VAIO Support Central features. To access VAIO Support Central, do the following: 1. [. . . ]