User manual SONY VAIO VPCB11FGX

[. . . ] Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; Stylistic is a registered trademark of Fujitsu Computer Systems Corporation. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PCMCIA and CardBus are registered trademarks of the Personal Computer Memory Card International Association. Centrino, Intel, and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. SigmaTel is a registered trademark of SigmaTel, Inc. Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc. [. . . ] Note that the BIOS for some systems will indicate "CD-ROM Drive", even when a DVD drive is connected. If you have an external DVD drive connected, proceed to the next step; otherwise, proceed to step 7. If you have an external DVD drive connected: · Select the Advanced menu in the BIOS window. · Scroll down to the USB Features submenu and press the Enter key to open it. · If Legacy USB Support is disabled, press the space bar to enable it. · Scroll down to SCSI SubClass Support and press the space bar to enable it. Press [F10], then click on [Yes] to exit the BIOS Setup Utility and return to the boot process. AUTOMATICALLY DOWNLOADING DRIVER UPDATES Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one). If the FDU icon does not appear in the system tray, it can be started by going to [Start] -> All Programs, and clicking on Fujitsu Driver Update; this will create the icon automatically. To invoke the FDU menu, right-click on the FDU icon. FCC NOTICES Notice to Users of Radios and Television This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The ringer equivalent number (REN) of this equipment is 0. 1B as shown on the label. The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5. 0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. [. . . ] You will also need a means to write to removable media during the installation. Before installing the TPM software, you will need to enable the security chip in the system BIOS. To do so: · If your system is running, click [Start] -> Shut Down, and select Restart. · If the system is not running, power it up. [. . . ]