User manual SONY VAIO VPCCB3AFX/R

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 95/98/2000/NT /XP/Vis ta are regis tered trademarks of Mic rosof t Corporation. [. . . ] IDE Master/ Slave, SATA 1/2/3/4 Press <Enter> to enter the sub-menu, and the following screen appears. 3-6 BIOS Setup Device / Vender / Size It will showing the device information that you connected to the SATA connector. LBA/Large M ode This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the device supports it and the devices is not already formatted with LBA mode disabled. This allows you to activate the S. M. A. R. T. (Self-Monitoring Analysis & Reporting Technology) capability for the hard disks. S. M. A. R. T is a utility that monitors your disk status to predict hard disk failure. This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline. Important Important Primary IDE M aster/ Slave, Serial-ATA 1/2/3/4 Channel are appearing when you connect the HD devices to the IDE/ SATA connector on the mainboard. Floppy A This item allows you to set the type of floppy drives installed. Available options: [Not Installed], [360K, 5. 25 in. ], [1. 2M, 5. 25 in. ], [720K, 3. 5 in. ], [1. 44M, 3. 5 in. ], [2. 88M, 3. 5 in. ]. 3-7 M S-7563 M ainboard System Information Press <Enter> to enter the sub-menu, and the following screen appears. This sub-menu shows the CPU information, BIOS version and memory status of your system (read only). 3-8 BIOS Setup Advanced BIOS Features Full Screen Logo Display This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. Quick Booting Setting the item to [Enabled] allows the system to boot within 10 seconds since it will skip some check items. Boot From Other Device Setting the option to [Yes] allows the system to try to boot from other device. if the system fails to boot from the 1st/ 2nd boot device. Trusted Computing Press <Enter> to enter the sub-menu: TCG/TPM SUPPORT This setting allows you to enable/disable the TCG/TPM. Clearing the TPM This item allows you to clear the user information saved in the TPM security chip. W hen you press <Enter>, a warning message will appear to ask if you want to clear the user information in the security chip. Use the left / right arrow key to select between [OK] and [Cancel], then press <Enter> to confirm your choice. 3-11 M S-7563 M ainboard Integrated Peripherals USB Controller This setting allows you to enable/disable the onboard USB controller. USB Device Legacy Support Select [Enabled] if you need to use a USB-interfaced device in the operating system. Onboard LAN Controller This item is used to enable/disable the onboard LAN controller. LAN Option ROM This item is used to decide whether to invoke the Boot ROM of the LAN controller. Onboard IEEE1394 Controller This item allows you to enable/disable the onboard IEEE1394 controller. HD Audio Controller This setting is used to enable/disable the onboard audio controller. [. . . ] And you can select desired value for overclocking. There will be several items for you to select for overclocking after you click button. You can click the plus sign button to increase the clock, or click the minus sign button to decrease the clock. And finally, click the Apply button to apply the values adjusted. [. . . ]