User manual SONY VAIO VPC-CW13FX/P

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 95/98/2000/NT /XP/Vis ta are regis tered trademarks of Mic rosof t Corporation. [. . . ] This item applies only when synchronous DRAM is installed in the system. 3-20 BIOS Setup tRAS This setting determines the time RAS takes to read from and write to memory cell. Advance Memory Setting Setting to [Auto] enables the advance memory timing automatically to be determined by BIOS. FSB/DRAM Ratio This item will allow you to adjust the ratio of FSB to memory. Adjusted DRAM Frequency (MHz) It shows the adjusted DRAM frequency. Adjust PCI Frequency This field allows you to select the PCI frequency (in MHz). Auto Disable DIM M/PCI Frequency W hen set to [Enabled], the system will remove (turn off) clocks from empty DIMM and PCI slots to minimize the electromagnetic interference (EMI). CPU Voltage / CPU GTL REF0 / CPU GTL REF1 / DRAM Voltage (V)/ DDR_VREF_CA/DA_A/B / MCH Voltage (V)/ MCH GTL REF / VTT FSB Voltage / ICH Voltage (V) These items dispaly the power status of Memory, FSB and chipset. Spread Spectrum W hen the motherboard's clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves. If you do not have any EMI problem, leave the setting at Disabled for optimal system stability and performance. But if you are plagued by EMI, set to Enabled for EMI reduction. The following illustrations are based on W indows ® XP environment and could look slightly different if you install the drivers in different operating systems. Insert the application CD into the CD-ROM drive. The setup screen will automatically appear. Click Realtek HD Audio Driver. Click here Important software utility is under continuous update The HD Audio Configuration to enhance audio applications. Hence, the program screens shown here in this section may be slightly different from the latest software utility and shall be held for reference only. a A-2 Realtek Audio 3. Click Next to install the Realtek High Definition Audio Driver. Click here 4. Click Finish to restart the system. S el ec t t hi s option Click here A-3 M S-7532 M ainboard Software Configuration After installing the audio driver, you are able to use the 2-, 4-, 6- or 8- channel audio feature now. Click the audio icon from the system tray at the lower-right corner of the screen to activate the HD Audio Configuration. It is also available to enable the audio driver by clicking the Realtek HD Audio M anager from the Control Panel. Double click a A-4 Realtek Audio Sound Effect Here you can select a sound effect you like from the Environment list. Environment Simulation You will be able to enjoy different sound experience by pulling down the arrow, totally 23 kinds of sound effect will be shown for selection. Realtek HD Audio Sound Manager also provides five popular settings "Stone Corridor", "Bathroom", "Sewer pipe", "Arena" and "Audio Corridor" for quick enjoyment. You may choose the provided sound effects, and the equalizer will adjust automatically. [. . . ] The CD will auto-run and the setup screen will appear. Under the Driver tab, click on JMicron JMB363 Drivers. The drivers will be automatically installed. Confirming Windows Vista/XP/2000 Driver Installation 1. [. . . ]