User manual SONY VAIO VPC-CW15FX/P

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 95/98/2000/NT /XP/Vis ta are regis tered trademarks of Mic rosof t Corporation. [. . . ] This setting determines the time RAS takes to read from and write to a memory cell. TRCD W hen the Configuration DRAM Timing by SPD sets to [Disabled], the field is adjustable. W hen DRAM is refreshed, both rows and columns are addressed separately. This setup item allows you to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less the clock cycles, the faster the DRAM performance. TRP W hen the Configuration DRAM Timing by SPD sets to [Disabled], the field is adjustable. This setting controls the number of cycles for Row Address Strobe (RAS) to be allowed to precharge. If insufficient time is allowed for the RAS to accumulate its charge before DRAM refresh, refresh may be incomplete and DRAM may fail to retain data. This item applies only when synchronous DRAM is installed in the system. 3-12 BIOS Setup South Bridge Press <Enter> to enter the sub-menu. Onboard LAN Controller This item is used to enable/disable the onboard LAN controller. Azalia HD Audio This setting is used to enable/disable the onboard audio controller. SuperIO Configuration Press <Enter> to enter the sub-menu. Super IO Chip This item shows the super IO chip's name. (read only) Floppy Disk Controller Configuration Press <Enter> to enter the sub-menu. Floppy Disk Controller This item is used to enable/disable the floppy disk controller. Device Settings This item shows the current setting. (read only) Serial Port 0 / 1 Configuration Press <Enter> to enter the sub-menu. Serial Port This item is used to enable/disable the serial port. Device Settings This item shows the current setting. (read only) Change Settings Select an address and corresponding interrupt for the serial port. Serial Port Speed This setting controls the receiving and transmitting speed of the serial port in use. 3-14 BIOS Setup Parallel Port Configuration Press <Enter> to enter the sub-menu. Parallel Port This item is used to enable/disable the parallel port. [. . . ] The CD will auto-run and the setup screen will appear. Under the Driver tab, click on JMicron Drivers. The drivers will be automatically installed. Confirming Windows Vista/XP/2000 Driver Installation 1. [. . . ]