User manual SONY VAIO VPC-EB1AFX

[. . . ] © Copyright Hewlett-Packard Company 2001-2002. Reproduction, adaptation, or translation of this manual is prohibited without prior written permission of Hewlett-Packard Company, except as allowed under the copyright laws. The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or translation of those programs without prior written permission of Hewlett-Packard Co. [. . . ] Please note that when you reach this limit, your last change to the region code will be hard-coded on the DVD drive, and will be permanent. Your SONY warranty does not cover the expense of correcting this situation. Refer to the help for your DVD player software for details about setting region codes. To create or copy CDs If your computer came with a CD-RW drive, it also includes software that lets you copy or create CDs. Click Start, Programs (Windows 2000) or Start, All Programs, Multimedia, CD Writer (Windows XP)--if Adaptec Easy CD, Veritas CDRW, or RecordNow is not listed, do the following. · Run Setup on the software CD to install the CD-RW software. For Windows XP, you can use Windows Media Player to create audio CDs, and Windows Explorer to create data CDs using a CD-RW drive. Refer to the software's help for details about creating or copying CDs. SONY recommends using SONY C4403A (CD-R) or C4404A (CD-RW) media--read and write quality may vary for other media. If you also use the CD-RW drive in a docking system, you should recalibrate the drive each time you move it, especially if you will be writing CDs. Use the CD-RW software and a clean commercial CD for the calibration. 76 Reference Guide Add-On Devices Connecting PC Cards Connecting PC Cards The computer's PC Card slot is available for storing data and expanding the communication capabilities of the computer. The computer supports standard Type I, II, and III PC Cards (PCMCIA and CardBus). If your model has an audio input port, you can connect a stereo input source (such as a CD player). CAUTION The audio jacks are three-terminal stereo jacks. They are not compatible with twoterminal mono plugs. Connecting a mono plug into the speaker-out jack may damage the computer. · Attach the audio cable to the corresponding audio port on the computer. Note When you plug a device into the external microphone port, the built-in microphone automatically turns off. When you plug a device into the audio out port, the built-in speakers automatically turn off. To use an external monitor Connecting an external monitor 1. Click Start, Shut Down, Shut down (Windows 2000) or Start, Turn Off Computer, Turn Off (Windows XP). Connect the monitor cable from the monitor to the monitor port on the rear of the computer. Connect the monitor to a power source and turn it on. Press the blue sleep button to turn on the computer. Reference Guide 81 Add-On Devices Connecting External Devices Switching the display to the external monitor · Press Fn+F5 to cycle through the display options: notebook display, external monitor, both. ­or­ Click Start, Programs (or All Programs), Hewlett-Packard, Notebook, SONY Display Settings. You can also add a display settings icon in the taskbar for quick access. [. . . ] In Anbetracht der Unterschiede zwischen den einzelnen Telefonnetzen bietet die Zertifizierung für sich genommen keine absolute Sicherheit, dass die Geräte bei Anschluss an jeder beliebigen Telefonbuchse funktionieren. Sollten Probleme auftreten, wenden Sie sich zunächst an den Gerätehersteller. Diese Geräte wurden zum Betrieb in allen Ländern der europäischen Wirtschaftsgemeinschaft entwickelt (Public Switched Telephone Networks). Die Kompatibilität zum Netz ist von internen Software-Einstellungen abhängig. [. . . ]