User manual SONY VAIO VPC-EB1BGX

[. . . ] © Copyright Hewlett-Packard Company 2000­2001. Reproduction, adaptation, or translation of this manual is prohibited without prior written permission of Hewlett-Packard Company, except as allowed under the copyright laws. The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or translation of those programs without prior written permission of Hewlett-Packard Co. [. . . ] Connect the monitor to a power source and turn it on. Press the power button to turn on the notebook. To switch the display to the external monitor ?Press Fn+F5 to cycle through the display options: notebook display, external monitor, both. ­or­ Click Start, All Programs, Hewlett-Packard, Notebook, SONY Display Settings, SONY Display Settings. You can add a display settings icon in the taskbar for quick access. 82 Reference Guide Add-On Devices Connecting External Devices ?If you need to use both displays at once, press Fn+F5 repeatedly until the image shows on both displays. However, by default, the image is limited by the internal display to 1024 × 768 pixels, so at a higher resolution you will see only part of the desktop on both displays. This doesn' happen if you use only the external monitor. If t you need to increase the refresh rate on the external monitor, you can switch to only the external monitor, or make the internal or external monitor a "secondary" display: 1. Sunlight, heat from nearby equipment, or other sources of infrared radiation can also cause transmission errors. To check the status of communications, click Start, Control Panel, Printers and Other Hardware, Wireless Link. ­or­ Move the pointer over the Wireless Link icon in the taskbar. Disabling the infrared port You should generally disable infrared communication when you aren' using it. Close any applications that are using infrared, and any folders on an infrared link. Click Start, Control Panel, Printers and Other Hardware, Wireless Link. On the Hardware tab, click Properties, and disable the device in the pull-down menu. Install your printer and assign it to the notebook' infrared port. You can then print s from your applications as you would to any other printer. Transferring files through an infrared connection You can use your notebook' infrared port to transfer files. Click Start, Control Panel, Printers and Other Hardware, Wireless Link. [. . . ] Diese Geräte wurden zum Betrieb in allen Ländern der europäischen Wirtschaftsgemeinschaft entwickelt (Public Switched Telephone Networks). Die Kompatibilität zum Netz ist von internen Software-Einstellungen abhängig. Wenden Sie sich an den Gerätehersteller, wenn Sie die Geräte in einem anderen Telefonnetz einsetzen müssen. Weitere Informationen zur Unterstützung für das Produkt erhalten Sie bei Hewlett-Packard. [. . . ]