User manual SONY VAIO VPC-EB1TFX

[. . . ] All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. [. . . ] Computer System Major Components 3­12 Maintenance and Service Guide Illustrated Parts Catalog Table 3-1 Spare Parts: Computer System Major Components (Continued) Spare Part Number Item 15 Description System boards (do not contain memory) for use only with notebook models using 45W processors* for use only with notebook models using non-45W processors* 309638-001 291588-001 *refer to item 11, "Processors, " for a listing of 45W and non-45W processors and spare part numbers 16 Base enclosures (include shields) for use only with Evo Notebook N1015 models for use only with Evo Notebook N1005 models for use only with Presario 900 models using 45W* processors for use only with Presario 900 models using non-45W* processors 311624-001 295718-001 310691-001 291593-001 *refer to item 11, "Processors, " for a listing of 45W and non-45W processors and spare part numbers 17 Hard drives 40 GB 30 GB 20 GB 18 Mini PCI communications boards U. S. modem International modem 248776-001 248777-002 and 285545-001 273491-001 192406-001 288291-001 Maintenance and Service Guide 3­13 Illustrated Parts Catalog Figure 3-2. Computer System Major Components 3­14 Maintenance and Service Guide Illustrated Parts Catalog Table 3-1 Spare Parts: Computer System Major Components (Continued) Spare Part Number 279769-001 Item 19 20 Description Disk cell RTC battery, 3 volt, 36 MAh, Li ion Memory expansion boards 512 MB 256 MB 128 MB 285524-001 285523-001 285522-001 21 Battery packs 8 cell, 62 Wh, 3. 6 Ah, Li ion 8 cell, 58 Wh, 3. 6 Ah, Li ion 289053-001 281766-001 22 Optical drive 24X Max CD-ROM/CD-RW combination drive 24X Max CD-ROM drive 310690-001 285526-001 and 311954-001 285528-001 311280-001 285527-001 311281-001 285529-001 16X Max CD-RW drive 8X Max DVD-ROM drive 8X Max DVD-ROM drive 8X Max DVD-ROM/CD-RW combination drive 8X Max DVD-ROM/CD-RW combination drive Maintenance and Service Guide 3­15 Illustrated Parts Catalog 3. 3 Miscellaneous Plastics/Hardware Kit Figure 3-3. Miscellaneous Plastics/Hardware Kit Components 3­16 Maintenance and Service Guide Illustrated Parts Catalog Table 3-2 Miscellaneous Plastics/Hardware Kit Components Spare Part Number 285541-001 Item 1 2 3 4 5 6 7 Description Left hinge cover Right hinge cover *Display release assembly TouchPad bracket Charger board shield Optical drive rear alignment rail Optical drive front alignment rail Item 8 9 10 11 12 13 14 Description PC Card space saver *Connector cover *Hard drive bracket *Mini PCI compartment cover *Memory expansion compartment cover *Battery bezel Computer feet *Includes two of each part, one with carbon finish for use with Evo Notebook N1005 models and one with silver finish for use with Presario 900 models Maintenance and Service Guide 3­17 Illustrated Parts Catalog 3. 4 Miscellaneous Cable Kit Figure 3-4. Miscellaneous Cable Kit Components Table 3-3 Miscellaneous Cable Kit Components Spare Part Number 285540-001 Item 1 2 3 4 Description Diskette drive cable TouchButton board-to-TouchPad cable System board-to-TouchButton board cable Modem cable 3­18 Maintenance and Service Guide Illustrated Parts Catalog 3. 5 Mass Storage Devices Figure 3-5. Mass Storage Devices l Table 3-4 Mass Storage Devices Spare Part Number Item 1 Description Hard drives 40 GB 30 GB 20 GB 273491-001 192406-001 288291-001 285539-001 2 3 Diskette drive Optical drives 24X Max CD-ROM/CD-RW combination drive 24X Max CD-ROM drive 16X Max CD-RW drive 8X Max DVD-ROM drive 8X Max DVD-ROM drive 8X Max DVD-ROM/CD-RW combination drive 8X Max DVD-ROM/CD-RW combination drive 310690-001 285526-001 and 311954-001 285528-001 311280-001 285527-001 311281-001 285529-001 Maintenance and Service Guide 3­19 Illustrated Parts Catalog 3. 6 Miscellaneous Table 3-5 Spare Parts: Miscellaneous (not illustrated) Spare Part Number 285547-001 285542-001 Description Logo Kit Screw Kit, includes the following screws (Refer to Appendix C, "Screw Listing, " for more information on screw specifications and usage. ) Torx T8 Metric 2. 5 × 5. 0 Torx T8 Metric 2. 5 × 8. 0 Torx T8 Metric 2. 5 × 9. 0 Torx T8 Metric 2. 5 × 14. 0 shoulder screw Phillips Metric 3. 0 × 3. 0 Phillips Metric 2. 5 × 4. 0 Phillips Metric 2. 0 × 4. 5 AC adapter, 90 W, 3 wire, slim line Power cords, 3 wire Australian Danish International Italian 170513-011 170513-081 170513-002 170513-061 Korean Swiss U. K. English 286755-001 170513-AD1 170513-115 170513-031 170513-001 3­20 Maintenance and Service Guide 4 Removal and Replacement Preliminaries This chapter provides essential information for proper and safe removal and replacement service. 4. 1 Tools Required You will need the following tools to complete the removal and replacement procedures: Magnetic screwdriver Phillips P0 screwdriver Torx T8 screwdriver Tool kit (includes connector removal tool, loopback plugs, and case utility tool) Maintenance and Service Guide 4­1 Removal and Replacement Preliminaries 4. 2 Service Considerations The following sections include some of the considerations that you should keep in mind during disassembly and assembly procedures. the As you remove each subassembly from the computer, place work subassembly (and all accompanying screws) away from the area to prevent damage. Plastic Parts Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and Connectors Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Or the device may function normally for a while, then degrade in the internal layers, reducing its life expectancy. 4. 5 Packaging and Transporting Precautions Use the following grounding precautions when packaging and transporting equipment: To avoid hand contact, transport products in static-safe containers, such as tubes, bags, or boxes. Protect all electrostatic-sensitive parts and assemblies with conductive or approved containers or packaging. Keep electrostatic-sensitive parts in their containers until the parts arrive at static-free workstations. Place items on a grounded surface before removing items from their containers. Always be properly grounded when touching a sensitive component or assembly. 4­4 Maintenance and Service Guide Removal and Replacement Preliminaries Store reusable electrostatic-sensitive parts from assemblies in protective packaging or nonconductive foam. Use transporters and conveyers made of antistatic belts and roller bushings. Ensure that mechanized equipment used for moving materials is wired to ground and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges. 4. 6 Workstation Precautions Use the following grounding precautions at workstations: Cover the workstation with approved static-dissipative material (refer to Table 4-2). Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. Use conductive field service tools, such as cutters, screwdrivers, and vacuums. When using fixtures that must directly contact dissipative surfaces, only use fixtures made of static-safe materials. [. . . ] Power cord sets for use in other countries must meet the requirements of the country where the computer is used. For more information on power cord set requirements, contact a Compaq authorized reseller or service provider. General Requirements The requirements listed below are applicable to all countries: The length of the power cord set must be at least 1. 5 m (5. 00 feet) and no more than 2. 0 m (6. 50 feet). All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used. The power cord set must have a minimum current capacity of 10 amperes and a nominal voltage rating of 125 or 250 volts AC, as required by each country's power system. [. . . ]