User manual SONY VAIO VPC-EB32FX/T

[. . . ] 52 CDs, DVDs, and Optical Drives. . . . . . . . . . . . . . . . 55 Inserting and Ejecting CDs or DVDs . . . . . . . . . . . . . . . . . . . . . . . 56 Copying and Playing CDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Playing CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Copying files to a CD-RW or CD-R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Disconnecting the USB mouse or keyboard when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. To disconnect the USB mouse or keyboard Unplug the USB cable from the USB port Frequently asked questions Why doesn't the computer recognize the USB mouse? Make sure the mouse is securely plugged into the USB port. See "Connecting a mouse or keyboard" for more information. You may need to install or reinstall the mouse driver software. Use the supplied Application Recovery CD to install the drivers. See "Using the Application Recovery CD(s)" for more information. Why doesn't the pointer move when I use the USB mouse? Make sure another mouse was not installed. 108 elba c BSU st ro p BSU on the computer. Using External Mice and Keyboards You may need to install or reinstall the mouse driver software. Use the supplied Application Recovery CD(s). See "Using the Application Recovery CD(s)" for more information. If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart the computer. If you still cannot use the pointer, restart the computer. You can restart the computer three different ways: Press the Windows key , and press U. Carrying a Floppy Disk Drive 115 VAIO Computer Quick Start Frequently asked questions Why doesn't the Safety Remove Hardware icon the drive is connected?appear on the taskbar when The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 2 3 4 Close all programs that were opened from the disk and wait for the LED indicator to turn off. Push the Eject button, and remove the disk. Reconnect the floppy disk drive by inserting the USB connector (with the USB icon facing upward) into the USB port . Restart the computer by clicking Start on the Windows® taskbar, Turn Off Computer, and then Restart. Why is the drive unable to write data to a floppy disk?The floppy disk drive cannot write data to a disk if it is inserted into the drive improperly. See "Inserting and removing floppy disks" for instructions on how to insert the disk properly. If the disk is inserted properly and you are still unable to write data to it, the disk may be write-protected. [. . . ] 1 2 Click Start on the Windows® taskbar, and click Turn Off Computer. Click Restart. If restarting your computer does not work, contact the software publisher or designated provider for technical support. See "Program Support Information" for contact information. Why does the message, "You must insert the Application CD into your optical drive" appear, and the program does not start? Some titles require specific files that are located on the Application Recovery CD. Insert the disc, and try starting the program again. [. . . ]