User manual SONY VAIO VPC-EB4LFX

[. . . ] Technical support for problems involving customer-installed memory may require fees. This product conforms with the following European Directives: 89/336/EEC, 92/31/EEC (EMC Directive), and 93/68/EEC (CE marking Directive). [. . . ] This equipment complies with EN55022 Class B and EN50082-1 for use in the following areas: residential, business, and light-industrial. For help installing the memory module, contact your nearest Sony Service Center. Turn off your computer and disconnect all the cables. Before using the memory module, please read this manual thoroughly and retain it for future reference. However, it may not be used with some models. When the computer has completely cooled down, turn it upside down and remove the screw on the lid of the memory module. Use the special bag or wrap the module in aluminum foil to protect it from electrostatic discharge. Do not subject the memory module to: · Strong magnets or speakers that are not magnetically shielded · Ambient temperature of more than 95°F (35°C) or less than 50°F (10°C) · A Match the connector on the memory module unit to the connector on the computer. Type Capacity Operating temperature Operating humidity Synchronous DRAM (SDRAM) 64 Mbytes 41°F to 95°F (5°C to 35°C) (temperature gradient less than 18°F (10°C)/hour) 20% to 80% (not condensed), provided that humidity is less than 65% at 95°F (35°C) (hygrometer reading of less than 84°F (29°C)) ­ 4°F to 140°F (­ 20°C to 60°C) (temperature gradient less than 18°F (10°C)/hour) 10% to 90% (not condensed), provided that humidity is less than 20% at 140°F (60°C) (hygrometer reading of less than 95°F (35°C)) 140 pin, Sony original connector Operating instructions (1) Warranty card (1) (U. B Press the white stripe of the memory module tightly into place. Close the memory module lid on the computer. Design and specifications are subject to change without notice. [. . . ] Design and specifications are subject to change without notice. If the memory amount is correctly expanded, memory installation is completed. [. . . ]