User manual SONY VAIO VPC-EE23FX/T

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] 2 Pull the levers on each side of the port replicator to disconnect the computer from the port replicator. 3 4 Lift the notebook away from the port replicator. Close the port replicator connector cover on the bottom of your computer. It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open, dust may get inside and damage the computer. To disconnect your port replicator completely from the mains voltage, unplug the AC adapter. Connecting peripheral devices Sony Notebook User Guide nN 61 Connecting an external display You can connect an external display to your notebook. For example, you can use your notebook with the following devices: Computer display (monitor); Multimedia computer display; TV; Projector. Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables. Turn on the peripherals, then turn on your computer. Connected external displays are used as second screens. On Windows® systems only, you can also use an external display to set up a virtual desktop. Connecting a computer display To connect a computer display, proceed as follows: 1 Plug the display cable (1) (not supplied) into the monitor/VGA connector (2) on the notebook. If necessary, plug one end of the display's power cord (3) into the display, and the other end into an AC outlet. 2 Connecting peripheral devices Sony Notebook User Guide nN 62 Connecting a multimedia computer display You can connect the notebook to a multimedia computer display that includes built-in speakers and a microphone. To connect a multimedia computer display, proceed as follows: 1 Plug the display cable (1) into the monitor/VGA connector (2) on the computer. To connect external speakers, proceed as follows: 1 2 3 Plug the speaker cable (1) into the headphone connector (2). Plug the other end of the speaker cable into the external speaker. Turn down the volume of the speakers before you turn them on. Make sure your speakers are designed for computer use. Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks. Connecting peripheral devices Sony Notebook User Guide nN 68 Connecting an external microphone Your VAIO notebook does not contain an internal microphone. If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, proceed as follows: 1 Plug the microphone cable (1) into the microphone connector (2) identified by the symbol. Make sure your microphone is designed for computer use. Connecting peripheral devices Sony Notebook User Guide nN 69 Connecting an external mouse or keyboard You can connect an external mouse or keyboard to the optional port replicator using the PS/2 mouse/ keyboard connector. There is only one PS/2 connector, so you can only connect one external device at the same time. Before you connect or disconnect the mouse or the keyboard, turn off the computer. To connect an external mouse or keyboard, proceed as follows: 1 Plug the mouse cable (1) or the keyboard cable (2) with the keyboard connector (3) identified by MOUSE/KEYBOARD. symbol facing up into the PS/2 mouse/ See the manual supplied with your mouse or keyboard for more information on installation and use. Connecting peripheral devices Sony Notebook User Guide nN 70 Connecting a Universal Serial Bus (USB) device You can connect a USB device (for example, a mouse, floppy disk drive, keyboard, printer) to your computer. Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer. [. . . ] PSTN (Public Switched Telephone Network) refers to the plain old telephone service, the national telecommunication networks implementing voice transmission by using analog signals. Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer. [. . . ]