User manual SONY VAIO VPC-EE35FX/WI

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] When playing DVD movies on battery power, set the power management profile to DVD. With other profiles, the movies can be choppy. Do not switch power saving modes while playing a DVD video. If the virus checker is active, you need to disable it. Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may cause the system to become unstable. Make sure that the screensaver is deactivated. Region codes indicators are labelled on the DVD discs to indicate in which region and on what type of player you can play the disc. Unless a '2' (Europe belongs to region '2') or 'all' (this means that you can play this DVD everywhere in the world) is labelled on your DVD disc or on the packaging, you cannot play the disc on this player. Do not try to change the region code settings of the DVD-ROM drive. Any difficulties caused by changing the region code settings of DVD-ROM drive are out of warranty. Using the CD-RW function To burn CDs, you can use CD-RW and CD-R discs: The CD-RW (CD-ReWritable) disc is a data memory medium that can be used to write, erase and rewrite a program or other data. Connecting peripheral devices Sony Notebook User Guide nN 69 The CD-R (CD-Recordable) disc is a data memory medium that can be used to write a program or other data, but once only. Before writing to a new CD-RW, you must first format the disc. Check that the power indicator on the front panel of the computer indicates that the power is on. Check that the battery packs are inserted properly and that they are charged. Make sure there is no diskette in the floppy disk drive. Confirm that the power cord and all cables are connected firmly. If you have plugged the computer into a UPS, make sure the UPS is turned on and works. Getting help Sony Notebook User Guide nN 73 If you are using an external display, check that it is plugged into a power source and turned on. Check that you have switched to the external display and that the brightness and contrast controls are adjusted correctly. Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn it on. When the internal backup battery is low on power, it may not be able to start your system properly. If this is the case, keep your VAIO connected to the mains for several hours. 4 5 6 7 8 9 1 2 3 The message Press <F1> to resume, <F2> to setup appears at startup If the floppy disk drive is empty, proceed as follows to initialize the BIOS: Turn off the computer. Remove any peripheral devices connected to the computer. [. . . ] The degree of sharpness and clarity of an image. Frequent computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch screen), 800 x 600 (appropriate for a 15-inch screen), 1, 024 by 768 (appropriate for a 17-inch screen), and 1, 280 by 1, 024. LCD displays usually use a higher resolution than a CRT of the same size. A cable that requires separate transmission types for the three colours on the display. [. . . ]