User manual SONY VAIO VPC-EE47FX

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by U. S. patents and other intellectual property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering or disassembly is prohibited. In the manual, the TM or ® marks are not specified. [. . . ] Alternatively, press <Alt>+<F4> until the Turn Off Computer screen is displayed. In the Turn Off Computer screen, hold down the <Shift> key to reveal the Hibernate button. The computer goes into Hibernate mode, the computer turns off. To activate Hibernate mode manually, use the Windows taskbar: 1 2 3 4 To return to Normal mode, quickly press the power button. Operation returns to the same state as before. You can leave Windows running when using Hibernate. If you press the power button for more than six seconds, the computer will switch off completely. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate uses less power than Standby and requires more time. Using your VAIO Hardware Guide nN 33 Using the Memory Stick Your VAIO computer is designed to support the Memory Stick. The Memory Stick is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and CLIÉ handheld devices. Because it is removable, it can be used for external data storage. Use the flash memory technology to download anything that can be converted into digital data, such as pictures, music, words, sounds, movies and photographs. The Memory Stick family ranges in capacity and compatibility. If the printer is not automatically installed, you can try the following: 1 2 3 4 From the Control Panel, select Printers and Other Hardware, then Printers and Faxes. Under Printer Tasks, click Add a printer. Let the Add Printer Wizard guide you through the installation process. The printer is now installed. This procedure applies for most, but not for all printers. Connecting peripheral devices Hardware Guide nN 38 Troubleshooting printing If you have problems printing, check the printed Troubleshooting Guide; the documentation delivered with your printer; and the VAIO-Link website (www. vaio-link. com). Connecting peripheral devices Hardware Guide nN 39 Connecting an i. LINK device Your VAIO computer includes a 4-pin i. LINK port on the right-hand side of the system unit. Use this port to connect an i. LINK device such as an optical disc drive, a digital video camera recorder or to link up two VAIO computers so you can copy, delete or edit files. The i. LINK device will need its own power supply. You are strongly advised to use only Sony i. LINK cables, as using other brands may cause problems with the i. LINK devices. The i. LINK connection may vary, depending on the software applications, operating system, and compatible i. LINK devices. Not all products with an i. LINK connection may communicate with each other. Please refer to the documentation that came with your compatible i. LINK device and software for information on operating conditions and proper connection. Connecting peripheral devices Hardware Guide nN 40 Connecting a digital video camera recorder To connect a digital video camera recorder, proceed as follows: 1 Plug one end of the i. LINK cable (not supplied) into the i. LINK port of the computer and the other end into the DV out port on your digital video camera recorder. On Sony digital video cameras, ports marked DV out, DV in/out or i. LINK are i. LINK-compatible. 2 Launch the DVgate application (see the Help files within the software itself for more information). The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. If your digital video camera recorder includes a Memory Stick slot, you can use it to copy images from the camera to your computer. [. . . ] For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the centre out. If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the centre out. Wipe off any remaining moisture with a dry soft cloth. This will affect the use of the disc irreparably. Precautions Hardware Guide nN 61 On handling Memory Sticks Do not touch the Memory Stick connector with your finger or metallic objects. [. . . ]