User manual SONY VAIO VPC-EG23FX DATASHEET

[. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antennas. Increase the separation between the equipment and receiver. [. . . ] For details, see "Selecting Video Options" on page 58. 5 JUMP 6 FREEZE 7 INDEX 8 9 VOL +/­ q; PIC MODE (Continued) 43 Using the Features Button qa FAVORITES qs RESET qd POWER buttons (GREEN) qf FUNCTION buttons qg TV/VIDEO Description Displays the Favorite Channels list. For details, see "Using Favorite Channels" on page 49. Press when in a menu to reset the settings to the factory defaults. Turn on and off the LCD projection TV and other audio/ video equipment you have programmed into the remote control. For instructions, see "Programming the Remote Control" on page 77. Select the equipment (TV, SAT/CABLE) that you want to operate. The indicator lights up momentarily when pushed to show which device the remote control is operating. Cycles through the video equipment connected to your LCD projection TV's video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6. Press 0 - 9 to select a channel, the channel changes after 2 seconds. For details, see "Using Twin ViewTM" on page 50. GUIDE qk MENU ql CH +/­ Displays the program guide of your satellite. To restore the sound, press again or press VOL +. 9 FREEZE -- (yellow labeled button) This is useful when you need to copy down information that appears on the LCD projection TV's screen (see "Using the Freeze Function" on page 53). q; SLEEP Press repeatedly until the LCD projection TV displays the approximate time in minutes (15, 30, 45, 60, or 90) that you want the LCD projection TV to remain on before shutting off automatically. Cancel by pressing SLEEP until "SLEEP OFF" appears. 46 Using the Features qa DISPLAY Press to display the channel number, current time and channel label (if set). To turn the display off, press DISPLAY again. qs TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6. Using the Features If you select Skip as a Video Label in the Setup menu, your LCD projection TV will skip the video input you selected (see "Video Label" on page 68). qd MTS/SAP Press to scroll through the Multi-channel TV Sound (MTS) options (see "MTS" on page 61). qf PIC MODE Press PIC MODE repeatedly to directly choose one of four different video modes that best suits the program you are watching. Vivid: Select for enhanced picture contrast and sharpness. Standard: Select to display a standard picture for normal viewing environments. Movie: Select to smooth the outline of digital image. Mild: Select to display a picture with minimum enhancements. When you select each mode, you can also adjust the picture quality (such as Brightness, Color, etc. ) to suit your taste. For details, see "Mode" on page 58. 47 Using the Features Watching the Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This LCD projection TV is capable of receiving the 1080i, 720p*, 480p and 480i digital TV formats. * This LCD projection TV is not capable of displaying a native 720p format signal. Therefore, when a native 720p format signal is received, it is converted into a 480p format signal. To view a digital TV program 1 2 3 4 Connect the DTV receiver to HD/DVD IN 5 or 6 on the LCD projection TV (for details, see page 38). Press TV/VIDEO to select HD/DVD IN 5 or 6. Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. [. . . ] In the password screen (see page 69), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. Be sure you have not inadvertently switched your LCD projection TV from channel 3 or 4 setting if you are using another device to change channels. If you are using another device to control channels, be sure the "function" button for that device has been pressed, or the slide switch is set correctly. [. . . ]