User manual SONY VAIO VPC-EH2EFX DATASHEET

[. . . ] -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. M4 × 45 (× 2) M4 × 65 (× 2) M4 (× 2) M4 (× 2) MASTER UNIT Owner's Record The model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. VAIO VPC-EH2EFX Serial No. VAIO VPC-EH2EFX Sony Corporation 2001 Printed in Korea Parts list 1 2 3 4 5 6 7 8 M4 (× 2) 5 m (196 7/8 in. ) 5 m (196 7/8 in. ) 9 0 Installation Notes · Choose the mounting location carefully so that the remote commander: -- will not interfere with driving the motorboat. -- can easy of operate the remote commander and the display is to see. -- will not get wet or dirty from sea water, rain, dust, etc. -- is not subject to high temperatures, such as from direct sunlight. · Be sure to use only the supplied mounting hardware for a safe and secure installation. If you press again within one second, you can continue manually search for another station. 5 MODE button ·Changes the playback side of the cassette. ·Selects CD units when several CD units are connected. For example: CD1 t CD2 t ··· ·Selects MD units when several MD units are connected. For example: MD1 t MD2 t ··· ·Changes the preset groups. For example: FM1 t FM2 t AM t ··· ·Changes the TV/AUX (video) mode. 6 OFF button Press to turn off the unit. 7 DISC/PRST button ·Fast-winds the tape. To resume normal playback, press the MODE button. [. . . ] To resume normal playback, press the MODE button. ·Changes the disc when one or more CD/MD units are connected. ·Receives the stations memorized on the preset number buttons on the master unit. CD/MD changer 6 7 8 ATT (attenuate) indicator When the ATT function is on, the ATT indicator blinks. [. . . ]