User manual SONY VAIO VPC-F114FX/H

[. . . ] Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engeneering or dissambly is prohibited. [. . . ] We recommend you to use the supplied plug, because the usage of any other phone plug can decrease the connection quality. Your computer cannot be connected to a coin-operated telephone, and may not work with multiple phone lines or a private branch exchange (PBX). If you connect the modem to a parallel connected phone line, the modem or the other connected device may not function properly. Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem. Phone cable and connectors are TNV (Telecommunications Network Voltage), according to EN60950. Only DTMP (Dual Tone Multi Frequency) signalling (tone dialling) is supported. Using your notebook Sony Notebook User Guide nN 52 Using programmable power keys (PPK) Press a programmable power key to start your favorite software without having to click the shortcuts on the desktop. Use a programmable power key by simply pressing it, or use it in combination with 3 keys on your keyboard: <Shift>, <Ctrl> or <Alt>. When your computer is off, press a PPK, and the system will be powered and launch the appropriate application. The factory settings for the buttons are: P1: opens the Club VAIO Website P2: starts your e-mail application (Outlook Express) P3: puts your machine in Standby mode. Using your notebook Sony Notebook User Guide nN 53 The factory settings for the PPK buttons in combination with other keys are: P1 + <Alt>: opens the VAIO-Link Website P1 + <Shift>: opens the VAIO Website P1 + <Ctrl>: opens the Sony Style Website P3 + <Ctrl>: opens the End-User License Agreement. Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate. When using battery power, you should be aware that the computer automatically enters Hibernate mode when the remaining battery charge drops below 7 percent, regardless of the power management setting you select. If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully charged battery. Using Normal mode This is the normal state of your computer when it is in use. The green power indicator light is on in this mode. Turn on the computer only after turning on all peripherals. Connecting a port replicator (page 57) Connecting an external display (page 60) Connecting external speakers (page 66) Connecting an external microphone (page 67) Connecting an external mouse or keyboard (page 68) Connecting a Universal Serial Bus (USB) mouse (page 69) Connecting a printer (page 70) Connecting an i. LINKTM device (page 72) Connecting to a network (LAN) (page 75) Connecting peripheral devices Sony Notebook User Guide nN 57 Connecting a port replicator Your notebook supports the use of a optional port replicator. Attaching a port replicator enables you to connect additional peripherals to your computer, such as a printer or an external display. 1 2 3 4 serial connector parallel port monitor connector network connector (Ethernet) (page 71) (page 71) (page 60) (page 75) 5 6 7 3 USB ports mouse/keyboard connector DC In connector (page 69) (page 68) (page 18) All connectors are SELV (Safety Extra Low Voltage) according to EN60950. The port replicator can be powered only with the AC adapter supplied with your notebook. Do not remove the AC adapter from the port replicator; this may cause data damage or hardware malfunctions. Connecting peripheral devices Sony Notebook User Guide nN 58 Attaching your computer to the port replicator To attach your computer to the port replicator, proceed as follows: 1 2 Turn off the computer and disconnect all peripherals. On the bottom of the computer, lift the port replicator port cover. 3 Attach the bottom of the computer to the port replicator connector until it clicks. Connecting peripheral devices Sony Notebook User Guide nN 59 4 5 Plug the cable attached to the AC adapter (1) into the DC In (2) connector on the port replicator (3). Plug the power cord (4) into the AC adapter and an AC outlet. The power indicator light turns green. 6 Turn on the computer. When you use the port replicator for the first time, the installation of the network drivers starts automatically. When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the attached port replicator may cause a temporary loss of power. You do not need to use the floppy disk supplied with your port replicator. Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: 1 2 3 Turn off the computer and the connected peripherals. Pull the levers on each side of the port replicator (1) to disconnect the computer from the port replicator. [. . . ] Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray, as they may cause damage to the disc. For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out. If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth. Precautions Sony Notebook User Guide nN 97 On using the battery pack Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. [. . . ]