User manual SONY VAIO VPC-F232FX

[. . . ] Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. For customers in the USA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Lithium batteries can explode if misused. · Use only CR2032 Lithium Batteries. Other types of lithium batteries may come loose when this camcorder is moved. If you have difficulty finding CR2032 Lithium Batteries, contact your Sony dealer. 1 2 Turn the POWER switch on. Press the catch at the top of the battery cover and open the cover. Press and pull up. VAIO VPC-F232FX (removed from supplied case) Inserting and Replacing the Lithium Battery 15 Operation Preparing the Power Supply Charging the battery When using an optional InfoLithium* battery (L-series) as the power supply for the VAIO VPC-F232FX, use the following method to charge the battery before use. * InfoLithium is a trademark of Sony Corporation. · When storing the battery out of use for a considerable period, first charge it fully, then use it to exhaustion. About the InfoLithium battery This is a lithium-ion battery, which for supporting devices notifies its charge state electronically. The L-series InfoLithium battery are identified by a mark. Note When charging, follow the instructions supplied with the AC adaptor/charger (option). The VAIO VPC-F232FX can be used with an InfoLithium battery, but does not support the communications function for charging state. Battery remaining time indication in the AC adaptor/charger display panel This indication is provided by data communications between the AC adaptor and the InfoLithium battery. Please note that the VAIO VPC-F232FX does not have a data communications capability, so there may be a discrepancy between the actual battery remaining time and the indication. Battery charge state indication The LCD panel shows an approximate remaining time for continuous shooting. This may not be an accurate prediction, depending on the pattern of use. Recording starts on the camcorder tape and the hard disk of the VAIO VPC-F232FX. If the cache recording function of the VAIO VPC-F232FX is on, the contents of cache memory are first written to the hard disk. refer to the section of the camcorder operating instructions describing the settings in the advanced menu. ) To couple the operation of the VAIO VPC-F232FX to the camcorder, set the VTR TRIGGER switch to INT ONLY. · If the camcorder is a model DSR-250/250P, set the camcorder menu item EXT REC CTL to OFF. (For more details refer to the camcorder operating instructions. ) 4 Press the camcorder start/stop button. Recording starts simultaneously on the camcorder tape and the hard disk of the VAIO VPC-F232FX. 5 Press the camcorder start/stop button. Recording stops on the camcorder tape and the hard disk of the VAIO VPC-F232FX. 5 Press the camcorder start/stop button. Recording stops simultaneously on the camcorder tape and the hard disk of the VAIO VPC-F232FX. If the tape ends during recording 1 2 3 Press the EJECT button on the camcorder. If the tape ends during recording Change the tape. Press the start/stop button on the camcorder. The VAIO VPC-F232FX continues recording while you change the tape. Note 1 2 3 Press the EJECT button on the camcorder. Press the start/stop button on the camcorder. [. . . ] · During recording, the hard disk capacity is almost used up. · During recording, the total number of clips created has exceeded 750. : Constant : 1 flash/second : 4 flashes/second Operation Continues Continues · Other than during recording, the hard disk is almost full. Continues · Other than during recording, the total number of clips created has exceeded 750. During recording or when recording is paused, the hard disk capacity is completely used up. [. . . ]