User manual SONY VAIO VPC-L113FX HARD DISK DRIVE REPLACEMENT INSTRUCTIONS

[. . . ] Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L. P. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided "as is" without warranty of any kind and is subject to change without notice. [. . . ] However, you can force a manual update by tapping the Quick GPS Connection icon or Start > Settings > Connections > Quick GPS Connection > Download Now. Also, the Quick GPS Connection Utility icon turns gray satellite locations again. within a few days letting you know when to update your 60 Chapter 4 Global Positioning System (GPS) ENWW Verifying Compatibility All SONY iPAQ Global Positioning System (GPS) enabled devices come with SONY iPAQ compatible GPS navigation software solutions. Depending on the region of the world where you purchase your device, solutions are either pre-installed on the device, downloaded from the Internet, or installed using CDs. If you are interested in purchasing additional GPS navigation software to use on your SONY iPAQ, check with the GPS software supplier (before you purchase, download, or install any GPS navigation software) to determine that the application is compatible with your specific SONY iPAQ model. Once you have verified compatibility, purchase and install a map onto the SONY iPAQ or memory card to be able to start using the GPS navigation technology. NOTE It is recommended that you download all GPS maps to a memory card that is compatible with your specific SONY iPAQ model, or to an iPAQ File Store folder (if your model provides one). This prevents you from losing your map data due to a possible power loss or a need to perform a clean reset on the SONY iPAQ. Since your SONY iPAQ model uses Windows Mobile 5. 0, you can store maps in main memory that is not erased if the battery loses power. Memory cards can be purchased at www. hp. com/accessories/ipaq. ENWW Verifying Compatibility 61 Configuring My GPS Software to Connect to My SONY iPAQ's GPS Receiver All GPS software applications need to know which communications port to use to access GPS data. Your SONY iPAQ already has the GPS port specified for the GPS software applications that came with the device. Blue icon -- Settings are up-to-date -- Settings expire in less than 50% of the remaining time Blue/Gray icon Gray icon -- Expired settings NOTE The Quick GPS Connection Utility icon turns gray within a few days letting you know when to update your satellite locations again. You can force a manual update by tapping the Quick GPS Connection icon > Download Now. or Start > Settings > Connections > Quick GPS Connection 66 Chapter 4 Global Positioning System (GPS) ENWW Losing The GPS Signal While in My Car GPS performance on the SONY iPAQ may be affected if the vehicle has thermal glass windows and windshields, which can block the SONY iPAQ from receiving a GPS signal from satellites. To improve GPS signal strength, place the SONY iPAQ where there is a clear view of the sky or on the dashboard of a vehicle that does not have thermal glass windshields. A direct line of sight is required between the SONY iPAQ and the GPS satellites to access information from the satellites. ENWW Losing The GPS Signal While in My Car 67 Losing the GPS Signal Frequently To improve the satellite signal to the GPS enabled SONY iPAQ, go outdoors to start the GPS navigation software. Place the SONY iPAQ where there is a clear view of the sky or on the dashboard of a vehicle that does not have thermal glass windshields or windows. NOTE Interference might take place close to tall buildings or large trees, and under very cloudy or overcast skies, all of which can block the satellite signal from reaching the SONY iPAQ. Try to avoid these obstructions before using GPS. 68 Chapter 4 Global Positioning System (GPS) ENWW Common Reasons For Interference When Using GPS Software Interference Type Vehicles with thermal glass windows and windshields How to Avoid Place the SONY iPAQ where there is a clear view of the sky or on the dashboard of a vehicle that does not have thermal glass windows. Move away from interference source or switch off the interference source. Cell Phones or other equipment radiating Radio Frequency (RF) energy or emitting strong electromagnetic radiation. For example, microwave ovens, high-power cordless phones, CB radios, Walkie-talkies, HAM equipment, X-ray and MRI machines, etc. Tall buildings, large trees, and very cloudy or overcast skies. Move away from interference source so there is a clear view of the sky. ENWW Common Reasons For Interference When Using GPS Software 69 5 Security 70 Chapter 5 Security ENWW Using SONY ProtectTools In addition to the security available from Microsoft, your SONY iPAQ has a more robust security option known as SONY ProtectTools, which helps protect your SONY iPAQ by providing authentication and encryption of E-mail, Calendar, Contacts, Notes, Tasks, files stored in the My Documents folder, and data stored on expansion cards. [. . . ] For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with the Hewlett-Packard accessories supplied with or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. U. S. Regulatory Notice For 900/1800 GSM Frequency Bands This device contains 900/1800 MHz GSM functions that are not operational in U. S. This filing is only applicable for GSM 850 MHz and PCS 1900 MHz operations. Health and Safety Information Since your SONY wireless phone is a radio transmitter and receiver, you may be exposed to Radio Frequency (RF) signals when it is powered on. [. . . ]