User manual SONY VAIO VPC-L117FX OPTICAL DISK DRIVE REPLACEMENT INSTRUCTIONS

[. . . ] Bluetooth® is a trademark owned by its proprietor and used by Hewlett-Packard Development Company, L. P. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information is provided "as is" without warranty of any kind and is subject to change without notice. [. . . ] Tap Start > Settings > Connections tab. Select the Make this device discoverable to other devices check box. NOTE If you no longer want your SONY iPAQ to be discoverable, clear the Make this device discoverable to other devices check box. Opening Bluetooth Settings 1. Tap the Bluetooth icon to turn on Bluetooth. Tap the Bluetooth tab > Bluetooth Settings. Setting Up an Incoming or Outgoing Bluetooth COM Port 1. Be sure your SONY iPAQ is connected to the other device via Bluetooth. Tap Start > Settings > Connections tab. Tap New Incoming Port or New Outgoing Port. NOTE New Outgoing Port is only available if at least one Bluetooth device supports serial (COM) connection. Select a numbered COM port from the list. NOTE If the port cannot be created, it is in use. Enter the IP address and the Port information for the secure WAP Gateway. Tap Finish. Troubleshooting Automatic Detection If the automatic network detection fails, you can manually relaunch the application by tapping Start > Settings > Connections tab > Phone Data Manager > Automatic detection button on the Phone Data Manager screen. 46 Chapter 3 Connections ENWW If the automatic detection setting fails, complete one or more of the following items: Check to see if the SIM card is present in the SONY iPAQ. If it is not present, insert the SIM card and relaunch the application. Ensure that the metal contacts on your SIM card and your SIM slot are not covered with a residue or dust that would inhibit a connection. Select the appropriate country and operator name, and then tap OK. If your operator name does not appear in the drop-down list, you must manually add it to the list by tapping the down arrow in the Operator box and tapping Create New . . ENWW GPRS/EDGE 47 Infrared Beaming an Item In the Calendar, Contacts, Notes, Tasks, Excel Mobile, Word Mobile, and PowerPoint Mobile, you can beam files and information to other devices using infrared. From the program, select the item you want to beam, such as an appointment in Calendar, a task in Tasks, a contact card in Contacts, or a file in File Manager. Align the infrared (IR) ports at close range until the target device name appears, then tap the device to which you want to send the item. CAUTION Files are saved automatically before they are beamed. If a Word document or Excel workbook was created on a computer, unsupported content and formatting may be lost when the files are saved. [. . . ] Use it on the ground only with crew permission. Use of the SONY iPAQ features other than the phone is at the discretion of the airline. 132 Chapter 18 Regulatory Notices ENWW Medical Electronic Equipment If you have a medical condition that requires you to use a pacemaker, hearing aid, or any type of medical electronic equipment, consult the manufacturer of the equipment to determine if the medical equipment is shielded from RF energy. Turn off your SONY iPAQ in health care facilities or hospitals when there are posted restrictions requiring you to do so. ENWW Medical Electronic Equipment 133 Wireless Notices In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, etc. [. . . ]