User manual SONY VAIO VPC-SA31FX

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. [. . . ] Tip Dynamic range compressor lets you compress the dynamic range of the soundtrack based on the dynamic range information included in the Dolby Digital signal. STD" is the standard setting, but it only enacts light compression. Therefore, we recommend using the "COMP. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. Unlike analog limiters, the levels are predetermined and provide a very natural compression. Amplifier Operations LEVEL menu parameters x T. TONE (Test tone) Lets you adjust the speaker levels and balance while listening to the test tone from your listening position. For details, see "7: Adjusting the speaker levels and balance (TEST TONE)" (page 28). x FRT BAL (Front speaker balance) Lets you adjust the balance between front left and right speakers. x CNT LVL (Center speaker level) x SL LVL (Surround left speaker level) x SR LVL (Surround right speaker level) x SW LVL (Subwoofer level) 37GB Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. Select "2-TONE" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 33) and "Overview of the menus" (page 34). Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select "3-SUR" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 33) and "Overview of the menus" (page 34). TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) SUR menu parameters x S. F. · DUAL M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. Settings for the video (VIDEO menu) You can use the VIDEO menu to make various adjustments for HDMI settings. Select "6-VIDEO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 33) and "Overview of the menus" (page 34). VIDEO menu parameters x AUDIO FOR HDMI (Audio for HDMI) Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection. · AMP The HDMI audio signals from the playback component is only output to speakers connected to the receiver. Multi-channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when "AUDIO FOR HDMI" is set to "AMP". x A. V. (Synchronizes audio with video output) Lets you delay the audio output so that the time gap between the audio output and visual display is minimized. You can adjust from 0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps. Notes · This parameter is useful when you use a large LCD or plasma monitor or a projector. · This function does not work when ­ signals with a sampling frequency of more than 48 kHz are input. ­ multi channel Linear PCM signals are received via an HDMI jack. · TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. [. . . ] Adjust the antennas and connect an external antenna, if necessary. · The signal strength of the stations is too weak (when tuning in with automatic tuning). · Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning). · No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). [. . . ]