User manual SONY VAIO VPCSA4DFX

[. . . ] is a trademark of Sony Corporation. D-NE10 © 2004 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] or > repeatedly to select the shape of the wave from the 3 shapes stored in memory for each frequency range, then turn the VOL +/­ repeatedly to select the sound volume. Available features MID A: Frequency range B: Sound volume (To turn up the volume, use VOL ­. To turn it down, use VOL +. ) Customizing sound quality You can customize sound quality by adjusting the sound volume in the 3 frequency ranges "LOW" (low range audio), "MID" (middle range audio) and "HIGH" (high range audio). For each frequency range, you can select the wave pattern from among 3 patterns, and can also adjust the sound volume in 7 levels for the pattern you select. Adjust sound quality by checking the shape of the wave on the display. m MID 4 5 Repeat steps 2 and 3 to make adjustment for the remaining 2 frequency ranges. Press the jog lever to enter the selection. (Continued) 21 Adjusting sound quality Notes Sound may skip: ­ if the CD player receives stronger continuous shock than expected, ­ if a dirty or scratched CD is played, or ­ when using poor-quality CD-Rs/RWs or if there is a problem with the original recording device or application software. To cancel the adjustment operation Press x for 2 seconds or more. Notes · When you select CUSTOM sound, sound may be distorted depending on your sound settings when you turn up the volume. · You may feel a difference in sound volume between the CUSTOM sound setting and other sound settings. Adjust the volume for your preference. Protecting your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps the maximum volume down to protect your hearing. The G-PROTECTION function The G-PROTECTION function has been developed to provide excellent protection against sound skipping during many active uses. 1 2 3 Press DISPLAY until the display changes. or > to select "AVLS, " then press the jog lever to enter the selection. or > to select "ON, " then press the jog lever to enter the selection. 1 2 3 While play is stopped, press DISPLAY until the display changes. or > to select "G-PRO, " then press the jog lever to enter the selection. or > to select "G-PRO 1" or "G-PRO 2, " then press the jog lever to enter the selection. For details, see the instruction manual that comes with the device you want to connect. Be sure to turn off all devices before making connections. 1 2 3 While play is stopped, press DISPLAY until the display changes. or > to select "AUDIO OUT, " then press the jog lever to enter the selection. or > to select the setting appropriate for the connected device, then press the jog lever to enter the selection. Connected device* Headphones Device connected using the connecting cord Setting "HP" "LINE" to i/LINE OUT (OPTICAL) Optical digital connecting cord Connecting cord (minijack) Left (white) Right (red) * When you connect the device using the optical digital connecting cord, you do not have to choose the setting. The setting will be switched to that for an optical connection automatically. Notes · When using the optical digital connecting cord, you cannot check the track number, etc. Check the display of the connected device. · Before you play a CD, turn down the volume of the connected device to avoid damaging the connected speakers. · Use the AC power adaptor for recording. If you use the rechargeable battery or dry battery as a power source, the battery may become completely depleted during recording. · Adjust the volume properly on the connected device so that the sound will not be distorted. · This CD player uses the Serial Copy Management System, which allows only firstgeneration digital copies to be made. [. . . ] Or remove all power sources, then insert the battery or connect the AC power adaptor again. (pages 14, 15, 28, 30) c Close the lid of the battery compartment firmly. (page 28) c AUDIO OUT is set to "LINE. " Adjust the volume of the connected device. (page 26) c AUDIO OUT is set to "HP. " Adjust the volume using VOL +/­ on the CD player. [. . . ]