User manual SONY VAIO VPC-SB1BGX

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the Esc key and then the < or , key to select the Exit tab. Press the M or m key to select Exit Setup and press the Enter key. At the confirmation prompt, press the Enter key. 4 5 6 7 8 9 Customizing Your VAIO Computer > Setting the Password n 119 N To remove the hard disk password 1 2 Turn on the computer. Press the F2 key when the VAIO logo appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key. The Hard Disk Password entry screen appears. Select Enter Master and User Passwords and press the Enter key. Enter the current password for Enter Current Hard Disk Master Password and press the Enter key. Press the Enter key without entering any letter for the remaining fields. Press the Enter key when the success message appears. Press the Esc key and then the < or , key to select the Exit tab. To change the settings, select the desired item and click Settings. Customizing Your VAIO Computer > Using the Power Saving Modes n 123 N Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes: Sleep and Hibernate. When using battery power, you should be aware that the computer will automatically enter Hibernate mode if the remaining battery life becomes short, regardless of the power management setting you select. !If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Using Normal Mode This is the normal state of the computer when it is in use. The green power indicator light is lit in this mode. Customizing Your VAIO Computer > Using the Power Saving Modes n 124 N Using Sleep Mode Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly in this mode. !If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off. To activate Sleep mode Click Start, the arrow next to the Lock button, and Sleep. When your computer is in Sleep mode, you cannot insert a disc. Your computer comes out of Sleep mode quicker than out of Hibernate mode. Sleep mode uses more power than Hibernate mode. !If the battery runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. [. . . ] ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [. . . ]