User manual SONY VAIO VPC-Z2290X

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Reorient the player itself for AM. for FM for AM 11 The CD Player Using the display You can check information about the CD using the display. DSPL Checking the information on an ATRAC CD/MP3 CD Press DSPL. The display changes as follows: When you are playing an MP3 CD containing files with an ID3 tag*, ID3 tag information is displayed. * ID3 tag is a format for adding ceratin information (track name, album name, artist name, etc. ) to MP3 files. This player conforms to Version 1. 0/1. 1/2. 3 of the ID3 tag format (for MP3 files only). Checking the information on an audio CD Press DSPL. The display changes as follows: t The current track number and playing time r The current track number and the remaining time of the current track r The number of tracks left and the time remaining on the CD r The total track number and total playing time on the CD Tip When you are playing an audio CD containing text information such as CD-TEXT, information is displayed. t The group name*1, the file name, the current file number and playing time r The artist name*2, the transfer rate/ frequency, the current file number and the remaining time of the current file r Total number of groups, total number of files *1 If the file does not belong to any group, the group name is displayed "Root". *2 If the file does not have an artist name, "­ ­ ­ ­" is displayed. 12 Locating a specific point in a track You can find a specific point in a track while playing a CD. 5-way control key Searching for your favorite tracks/files CD Jog dial ENT The CD Player To locate a point while listening to the sound a point while observing the display Do this While playing, push the 5-way control key toward > (forward) or . (backward) and hold it until you find the point In pause, push the 5-way control key toward > (forward) or . (backward) and hold it until you find the point Searching for a track on an audio CD 1 2 Press CD. Press MODE repeatedly in stop mode until "1" appears in the display. Push the 5-way control key toward +/ ­ and . /> to select the track/ file you want to play. Press u. To cancel the group play Stop playing first. Then press MODE until " " disappears from the display. To cancel the single track play Stop playing first. To change the current program Press x once while programing. Then create a new program following the programing procedure. Tip You can play the same program again, since the program is saved until you open the CD compartment. Playing tracks repeatedly (Repeat play) You can play tracks repeatedly in normal play mode and other play modes you want. CD REPEAT The CD Player 1 2 Press CD. You can play tracks repeatedly in normal play mode and other play modes you want (see pages 15 ­ 19). " appears in the 3 To cancel Repeat play Press REPEAT until " " disappears from the display. 19 The Radio Presetting radio stations You can store radio stations into the player's memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. RADIO BAND AUTO PRESET 5-way control key ENT If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO·BAND·AUTO PRESET to select the band. 2 Tune in a station you want by pushing the 5-way control key toward TUNE + or TUNE ­. 4 Push the 5-way control key toward PRESET . or PRESET > until the preset number you want for the station on flashes. The new station replaces the old one. 1 2 3 Press RADIO·BAND·AUTO PRESET to select the band. Hold down RADIO·BAND·AUTO PRESET until "Auto Preset" flashes in the display. [. . . ] · The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. · There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. · Replace all the batteries with new ones if they are weak. [. . . ]