User manual SONY VPH-1001Q

[. . . ] Telephone Number: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] (Adjust) Produces a bolder, dynamic picture. Set according to the input signal source. High: Gives higher emphasis to the black color. Low: Gives lower emphasis to the black color. Gamma Correction Adjusts the response characteristics of the tone of the picture. Select a favorite tone from three options. Gamma1: Makes a scene a little brighter. Off: Gamma Correction is "Off" Using the specified controller, "ImageDirector3" (supplied as a CD-ROM) allows you to adjust, set, and store a favorite tone in a computer. For detailed information on "ImageDirector3", refer to the Help provided on the supplied CD-ROM in the computer. 42 Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. Using the Menus RCP (Real Color Processing) You can adjust the color and hue of each selected portion of the picture independently. User1, User2, User3: You can adjust the picture using Real Color Processing and store the settings. Once the settings are stored, you can view the picture with the adjusted picture quality. Tip To display the displayable region within the four directions of the screen, refer to "Blanking" on the Installation menu (1 page 51). Wide Mode (PC signal) Over Scan 44 Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Note This item is effective only when a Hi-Vision signal (preset memory No. 7, 8, 9, 12, 13 and 14) is input and "On" is selected in "Over Scan". V Center Adjust the whole picture by moving up and down on the screen. As the selected number increases, the screen moves up, and as the selected number decreases, the screen moves down. Note Using the Menus This item is adjustable only when "Zoom" is selected. Vertical Size Reduces or enlarges the picture vertically. The screen is enlarged as the setting increases and reduced as the setting decreases. cannot be seen, use this together with "V Center". Note This item is adjustable only when "Zoom" is selected. Adjust Signal You can adjust the input signal. APA: Adjusts the position of the image signal automatically for "Phase", "Pitch", and "Shift". [. . . ] 45 Pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Adjusting picture position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]