User manual SONY VPL-CX125

[. . . ] In no event shall Sony Corporation be liable for any incidental, consequential or special damages, whether based on tort, contract, or other wise, arising out of or in connection with this manual, the software or other information contained herein or the use thereof. â· Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. Windows and Microsoft are registered trademarks of Microsoft Corporation in the United States and other countries. Other system names, product names and company names appearing in this manual are trademarks or registered trademarks of their respective holders. [. . . ] Click the projector button being connected on the main window and then select the computer to be connected. When the computer is not connected to the projector, you can display the window. projector Station for Air Shot Version 2 help topics will be displayed. The scroll bar is displayed when 6 or more projectors exist. When the button is clicked, only the tool bar for the projector control is displayed. When the button is clicked, the whole main window is displayed. When multiple projectors are connected When only one projector is connected, this menu is not displayed. The icon, computer name, and IP address of the computer being connected to the projector are displayed. the computer name is changed in the [Option Setting] window. When no computer is connected to the projector, this display does not appear. [Picture Muting] button: Click the button to clear the picture temporally. [Power On/Standby] button: Click to turn on the power of the projector or set it in standby mode. Names and Functions of the tabs on the [Option Setting] dialog box This is used for the settings of Projector Station for Air Shot Version 2. When the connectable projector cannot be detected with the selected LAN module, the connectable projector is being searched according to the priorities of the LAN modules. [Use USB Wireless LAN Module as Simple Mode] is not available for this unit. When you change the password, input a new password after deleting the Password (*****) that was set. â· If you forget your password, consult with qualified Sony personnel. X Report Timing field Regular Report A report on the present status of the projector, installation status, etc. of the projector is periodically sent by e-mail. Set the timing for sending the e-mail messages as follows: AT: Specify the time when e-mail is to be sent. select the hour from the drop-down list. Every Week on Days: Select this check box to send e-mail on the selected days every week. [. . . ] C Close the [Option Setting] window and then communicate it and turn it off again. The computer cannot communicate with the projector as the other computer has already established communications with the projector. C After the projector is disconnected from the computer, communicate with the projector again. â· You tried to connect more than 5 projectors to one computer. [. . . ]