User manual SONY VPL-CX86

[. . . ] The following manuals and softwares are supplied with this unit. for the VPL-CX80 , read the Safety Regulations , Quick Reference Manual , and Operating Instructions (for the VPL-CX86/ VPL-CX80). Other manuals on the CDROM and other software applications were not prepared for the VPL-CX80. Also, the Operating Instructions for the VPL-CX76/VPL-CX70 are included on the CD-ROM, but are not used for this unit. [. . . ] The internal circuitry will cause the fan to automatically operate for a certain time even after the power cord is removed. However, if the unit has been on for less than 15 minutes, the fan might not begin to turn as a result of inadequate charging. In that case, follow the procedure for turning off the power as described in "Turning Off the Power" on page 19. Use the arrow key (M/m/</, ) to scroll the enlarged image. This function works when a signal from a computer is input, or when a still picture (except a movie picture) stored in a "Memory Stick" is projected. This function does not work when a video signal is input. To return the image to its original size Press the D ZOOM ­ key. Just pressing the RESET key returns the image back to its original size immediately. "Freeze" appears when the key is pressed. This function works when a signal from a computer is input or when a still picture stored in a "Memory Stick" is projected. The projector is equipped with an on-screen menu for making various adjustments and settings. Use the M or m key to select a menu, then press the , or ENTER key. Use the M or m key to select the item, then press the , or ENTER key. You can hide this indicator using "Status" on the MENU SETTING menu. When changing the adjustment level: To increase the number, press the M or , key. When changing the setting: Press the M or m key to change the setting. The menu disappears automatically if a key is not pressed for one minute. Select the item that you want to reset, and then pres the RESET key on the Remote Commander. " appears on the screen and the setting of the item that you have selected is reset to its factory preset value. The settings are automatically stored in the projector memory when the ENTER key is pressed. If there is no input signal, "Cannot adjust this item. Items that cannot be adjusted, depending on the input signal, are not displayed on the menu. [. . . ] 750 horizontal TV lines (Video input) 1, 024 × 768 dots (RGB input) Acceptable computer signals1) fH: 19 to 92 kHz fV: 48 to 92 Hz (Maximum input signal resolution: SXGA+ 1400 × 1050 fV: 60 Hz) 1) Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector. 43 is the color system used when playing back a video recorded in NTSC on a NTSC4. 3 BTU Operating temperature 0°C to 35°C (32°F to 95°F) Operating humidity 35% to 85% (no condensation) Storage temperature ­20°C to +60°C (­4°F to +140°F) Storage humidity 10% to 90% Supplied accessories Remote Commander (1) Size AA (R6) batteries (2) HD D-sub 15 pin cable (2 m) (1) (1-791-992-xx) USB cable A type - B type (1) (1-790-081-xx) Carrying case (1) AC power cord (1) Air filter (for replacement) (1) CD-ROM (Application software and Operating instructions) (1) Quick Reference Manual (1) Safety Regulations (1) Security Label (1) VPL-CX86 only Presentation tool (1) Size AAA (R03) batteries (2) Wireless LAN card (1) USB wireless LAN module (IFUWLM2) (1) Design and specifications are subject to change without notice. Some of the items may not be available in some areas. [. . . ]