User manual SONY VPL-EX175

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] On: Enhances the black by emphasizing the contrast. Auto: Automatically switches to an optimum iris according to a projected scene. The contrast of the scene is emphasized most. Lamp Control Switches the lamp wattage during projection. Low: Enhances the black by reducing the lamp wattage. Tip If "Lamp Control" is set to "Low, " the next time the power is turned on, the lamp will use the "High" setting initially, and then go to "Low. " DDE (Dynamic Detail Enhancer) Cinema Black Pro 38 Picture Menu Item RCP (Real Color Processing) Description You can adjust the color and hue of each selected portion of the picture independently. User 1, 2 and 3: You can adjust the picture using Real Color Processing and store the settings. Once the settings are stored, you can view the picture with the adjusted picture quality. For details, see "Adjusting the Picture Using Real Color Processing. " (1 page 32) Using the Menus Picture Menu 39 Signal Menu The Signal menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc . Adjust Signal menu Picture Signal Function Installation Setup Information Sel: Set: Back: Exit: Adjust Signal Wide Mode : V Position : Zoom 0 Picture Signal Function Installation Setup Information Adjust Signal Dot Phase : H Size : Shift : 24 1344 H : 2 0 4 V: 3 4 Sel: Set: Back: Exit: Item Adjust Signal Dot Phase H Size Description Adjusts the picture from a computer for clearer picture after it is adjusted by pressing the APA button. Adjusts the horizontal size of the picture from a computer. When set to Low, the power consumption in standby mode is lowered. When set to On, the POWER SAVING indicator lights. The projector goes into power saving mode if no signal is input for 10 minutes, and the lamp goes out and the cooling fan keeps running. In power saving mode, no button functions for the first 60 seconds, then it is cancelled when a signal is input or any button is pressed. If you do not set the projector to power saving mode, select Off. Standby Mode Power Saving Function menu 41 Installation Menu The Installation menu is used for changing the installation settings. Picture Signal Function Installation Setup Information Sel: Set: Back: Exit: V Keystone : Image Flip : Background : Illumination : High Altitude Mode : Network Setting 0 Off Blue On Off Item V Keystone Description Corrects the vertical trapezoidal distortion of the picture. Sets a lower value (­ direction) when the bottom of the trapezoid is longer than the top ( ). Sets a higher value (+ direction) when the top of the trapezoid is longer than the bottom ( ). Flips the picture on the screen horizontally and/or vertically. HV: Flips the picture horizontally and vertically. Selects the background color of the screen when no signal is input. You can select "Black" or "Blue. " Turns on the illumination on the top panel of the projector when set to On. [. . . ] 56 Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 F fH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Function menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 fV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 G Gamma Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Index 65 R Real Color Processing . . . . . . . . . . . . . . . . . . . . . . . 32, 39 Remote control inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 location of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]