User manual SONY VPL-FH500L

[. . . ] 4-191-106-13 (1) Data Projector Operating Instructions Before operating the unit, please read this manual and supplied Quick Reference Manual thoroughly and retain it for future reference. VPL-FH500L VPL-FX500L Not all models are available in all countries and area. Please check with your local Sony Authorized Dealer. © 2010 Sony Corporation Table of Contents Overview Location and Function of Controls . . . . 3 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connector Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Adjust Item: Selects how to make adjustments from below. Shift: Shifts the whole picture and makes adjustments. Zone: Selects the desired range and makes adjustments. Adjust Color: Assigns the desired color to adjust the gaps in color. Select "R" (Red) or "B" (Blue) to make adjustments based on "G" (Green). Pattern Color: Select "R/G" (Red and Green) or "R/G/B" (White, all colors) when "Adjust Color" is "R" (Red). Select "B/G" (Blue and Green) or "R/G/B" (White, all colors) when the "Adjust Color" is "B" (Blue). Adjust: The shift adjustment and zone adjustment of the color selected in "Adjust Color" can be made with V/v/B/b buttons. 26 The Installation Menu Setting items Description Color Matching*2 *6 Adjust/Reset: For correcting the brightness and color of the whole projected image manually from the signal level in six steps. Notes *1: Do not use the projector at an altitude of 2, 700 m or higher. *2: Available for VPL-FH500L only *3: Depending on the position adjusted with the lens shift feature, the aspect ratio of the image may change from the original or projected image may be distorted with Keystone adjustment. *4: Since the Keystone adjustment is an electronic correction, the image may be deteriorated. *5: Depending on the adjustment value of "Panel Alignment, " the color and aspect ratio may be changed. *6: The brightness and color of the projected image may not match completely, even after you adjust "Brightness" and "Color. " The Installation Menu 27 Adjustments and Settings Using a Menu The Information Menu The Information menu enables you to confirm various information on the projector, such as the total usage hours of a lamp. Items Model Name Serial No. fH / fV (horizontal frequency/vertical frequency)*1 Signal type Lamp Timer Description Displays the model name. Displays the horizontal frequency/vertical frequency of the current input signal. Displays the type of the current input signal. Indicates the usage time and status of a lamp. ( : Lamp 1/ : Lamp 2) : The lamp is in lights. : The lamp is in abnormal status. Note *1: These items may not be displayed depending on the input signal. 28 The Information Menu B Network Using Network Features Connection to the network allows you to operate the following features: · Checking the current status of the projector via a Web browser. · Remotely controlling the projector via a Web browser. · Receiving the Mail Report for the projector. · Making the network settings for the projector. · Supports network monitoring and control protocol (Advertisement, PJ Talk, PJ Link, SNMP, AMX DDDP [Dynamic Device Discovery Protocol]). Notes · The menu displays used for the explanation below may be different depending on the model you are using. [. . . ] 25 Projecting an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Projection distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 57 Projection distance and lens shift range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Projection distance formula . . . . . . . . . . . . . . [. . . ]