User manual SONY VPL-HS51

[. . . ] 2-188-141-11 (1) Video Projector Operating Instructions VPL-HS50 VPL-HS51 © 2004 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Address: 16450 W. Telephone Number: 858-942-2230 This device complies with Part 15 of the FCC Rules. [. . . ] Use < or , to adjust the horizontal position. As the setting for V (vertical) increases, the picture moves up, and as the setting decreases, the picture moves down. Use M or m to adjust the vertical position. Full: A picture squeezed to 4:3 is diplayed with the correct aspect. Normal: The 4:3 aspect ratio picture is displayed to fill the vertical screen size. Wide Zoom: The 4:3 aspect ratio picture is enlarged and the upper and lower portions are compressed to fit the 16:9 screen. Zoom: The 4:3 aspect ratio picture is enlarged vertically and horizontally at the equal ratio to fill the 16:9 screen. Subtitle: The subtitle area is compressed and displayed at the lower part of the screen. Adjusts the vertical position of the picture in wide screen mode. As the setting increases, the picture moves up. As the setting decreases, the picture moves down. Note This item is adjustable only when "Zoom" or "Subtitle" is selected. Shift Wide Mode V Position Title Area Adjusts the subtitle area. As the setting increases, the subtitle area moves up. As the setting decreases, the subtitle area moves down. Note This item is adjustable only when "Subtitle" is selected. 40 Signal Menu Function menu The Function menu is used for changing the settings of the function of the projector. Using the Menus Picture Signal Function Installation Setup Information Sel: Set: Back: Exit: Smart APA : Auto Input Search : Standby Mode : Power Saving: On Off Standard Off Item Smart APA Description With this item set to On, the APA function works automatically for a signal input from a computer so that the picture can be seen clearly. You can also activate the APA function by pressing the APA button on the remote control. Tip The APA (Auto Pixel Alignment) automatically adjusts the input signal from a computer so that the picture can be seen clearly. Auto Input Search When set to On, the projector detects whether Component, HDMI, Video, S Video or Input-A signal is input when the projector is turned on or the INPUT button is pressed. Then the detected input channel is automatically displayed. Set to Off when you want to switch the input channel manually. When set to Low, the power consumption in standby mode is lowered. When set to On, the POWER SAVING indicator lights. The projector goes into power saving mode if no signal is input for 10 minutes, and the lamp goes out and the cooling fan keeps running. [. . . ] 64 Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Reset resettable items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 resetting the items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 S Selecting the menu language . . . . . . . . . . . . . . . . . . [. . . ]