User manual SONY VPL-VW200

[. . . ] 3-275-583-11 (1) Video Projector Operating Instructions VPL-VW200 © 2007 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Declaration of Conformity Trade Name: SONY Model No. : VPL-VW200 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U. S. A. [. . . ] Phase: Adjusts the dot phase of the panel and the computer signal. Adjust the picture to the point where it looks clearest. Pitch: Adjusts the horizontal size of the picture from a computer. The higher the setting, the wider the picture. The lower the setting, the narrower the picture. Adjust the setting to match the number of dots of the input signal. Shift: Adjusts the position of the picture. H: As the setting for H (horizontal) increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. Use < / , to adjust the horizontal position. V: As the setting for V (vertical) increases, the picture moves up, and as the setting decreases, the picture moves down. Use M / m to adjust the vertical position. 47 Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to "Off" to turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. Selects the language used in the menu and on-screen displays. Available languages are: English, Dutch, French, Italian, German, Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, Chinese (Simplified Chinese), Chinese (Traditional Chinese), Korean, Thai and Arabic. Use this item when using the projector at high altitudes. High: Use this setting when using the projector at an altitude of 1, 500 m or higher. Standard: Use this setting when using the projector at normal altitudes. Note Language Cooling Setting When this item is set to "High", the fan noise becomes slightly louder since the number of fan rotation increases. Standby Mode Sets to lower the power consumption in standby. Standard1: Sets power consumption to normal. Standard2: Sets the network function ineffective and reduces power consumption lower than "Standard1". Low: Reduces power consumption lower than "Standard2". Note When this item is set to "Low", the HDMI Control function and the network function will not operate in standby. Power Saving Sets the power saving mode. [. . . ] 55 Preset Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 E Expert Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 F fH fV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 G Gamma Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 44 H HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Hue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 85 R RCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Remote control inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 11 location of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]