User manual SONY VPL-VW60

[. . . ] 3-218-492-12 (1) Video Projector Operating Instructions VPL-VW60 © 2007 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Declaration of Conformity Trade Name: SONY Model No. : VPL-VW60 Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U. S. A. [. . . ] Wide: Reproduces more natural color tones in a wider range of color reproduction, compared to "Normal". Color Space 43 Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. . Wide Mode (Video signal) You can set the aspect ratio of the picture to be displayed for the current input signal. This item is enabled only when a video signal (preset memory numbers 1 to 14) (1 page 64, 65) is input. Wide Zoom: A 4:3 aspect ratio picture is enlarged over the entire screen properly. The upper and lower portions of the screen are slightly cut off. Normal: A picture with normal 4:3 aspect ratio is displayed in the center of the screen to fill the vertical screen size. Full: A picture squeezed to 4:3 is displayed with the correct aspect ratio. A 4:3 picture is enlarged horizontally to fit the 16:9 screen. Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen. Anamorphic Zoom: A 2. 35:1 aspect ratio picture is converted to a normal 16:9 picture on the screen. This mode is best suited when using a commercially available Anamorphic lens which converts a normal 16:9 aspect ratio picture to a 2. 35:1 picture. You can set the aspect ratio of the picture to be displayed for the current input signal. This item is enabled only when a PC signal is input. Full1: Displays a picture on the whole of the screen without changing the aspect ratio of the original picture. Full2: Displays a picture on the whole of the screen. Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen. On: Hides the outline of the input picture. Select this setting when noise appears along the edge of the picture. Off: Projects the whole of the input picture. Tip To display the displayable region within the four directions of the screen, refer to "Blanking" on the Installation menu (1 page 51). Wide Mode (PC signal) Over Scan 44 Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Note This item is effective only when a Hi-Vision signal (preset memory No. [. . . ] 21 picture quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Advanced Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 41 Auto Input Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 I Image Flip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ImageDirector3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35, 42 Input-A Signal Sel. [. . . ]