User manual SONY VPL-VW80

[. . . ] 4-110-071-12 (1) Video Projector Operating Instructions VPL-VW80 © 2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. THIS APPARATUS MUST BE EARTHED. Declaration of Conformity Trade Name: SONY Model No. : VPL-VW80 Responsible Party: Sony Electronics Inc. [. . . ] Zoom: A 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen. Anamorphic Zoom: A 2. 35:1 aspect ratio picture is converted to a normal 16:9 picture on the screen. This mode is best suited when using a commercially available Anamorphic lens which converts a normal 16:9 aspect ratio picture to a 2. 35:1 picture. When set to this setting, only 12 V signal is output from the TRIGGER 2 connector. (1 pages 8, 35) You can switch settings by pressing WIDE MODE on the remote control. You can set the aspect ratio of the picture to be displayed for the current input signal. (1 page 35) This item is enabled only when a computer signal is input. Full 1: Displays a picture on the whole of the screen without changing the aspect ratio of the original picture. Full 2: Displays a picture on the whole of the screen. Zoom: A 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen. You can switch settings by pressing WIDE MODE on the remote control. Wide Mode (Computer signal) 51 Over Scan Hides the outline of the picture. On: Hides the outline of the input picture. Select this setting when noise appears along the edge of the picture. Off: Projects the whole of the input picture. Tip To display the displayable region within the four directions of the screen, refer to "Blanking" on the Installation menu (1 page 58). Screen Area Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Adjust the whole picture by moving up and down on the screen. As the selected number increases, the screen moves up, and as the selected number decreases, the screen moves down. Reduces or enlarges the picture vertically. The screen is enlarged as the setting increases and reduced as the setting decreases. cannot be seen, use this together with "V Center". [. . . ] 50 Remote control inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 11 location of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reset resettable items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 resetting the items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]