User manual SONY VPLL-ZP400

[. . . ] Telephone Number: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Select a favorite tone from three options. Gamma1: Makes a scene a little brighter. Off: Gamma Correction is "Off" Using the specified controller, "ImageDirector3" (supplied as a CD-ROM) allows you to adjust, set, and store a favorite tone in a computer. For detailed information on "ImageDirector3", refer to the Help provided on the supplied CD-ROM in the computer. 42 Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. Using the Menus RCP (Real Color Processing) You can adjust the color and hue of each selected portion of the picture independently. User1, User2, User3: You can adjust the picture using Real Color Processing and store the settings. Once the settings are stored, you can view the picture with the adjusted picture quality. For details, see "Adjusting the Picture Using Real Color Processing". (1 page 34) You can convert the range of color reproduction. Normal: Converts the color to Hi-Vision color. Wide: Reproduces more natural color tones in a wider range of color reproduction, compared to "Normal". Color Space 43 Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. . Wide Mode (Video signal) You can set the aspect ratio of the picture to be displayed for the current input signal. cannot be seen, use this together with "V Center". Note Using the Menus This item is adjustable only when "Zoom" is selected. Adjust Signal You can adjust the input signal. APA: Adjusts the position of the image signal automatically for "Phase", "Pitch", and "Shift". Phase: Adjusts the dot phase of the panel and the computer signal. Adjust the picture to the point where it looks clearest. Pitch: Adjusts the horizontal size of the picture from a computer. The higher the setting, the wider the picture. The lower the setting, the narrower the picture. Adjust the setting to match the number of dots of the input signal. Shift: Adjusts the position of the picture. H: As the setting for H (horizontal) increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. [. . . ] 31 Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 User . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]