Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY WALKMAN D-NE10. We hope that this SONY WALKMAN D-NE10 user guide will be useful to you.
Lastmanuals help download the user guide SONY WALKMAN D-NE10.
You may also download the following manuals related to this product:
SONY WALKMAN D-NE10 RELEASE NOTE (378 ko)
SONY WALKMAN D-NE10 PRODUCT BROCHURE (255 ko)
Manual abstract: user guide SONY WALKMAN D-NE10
Detailed instructions for use are in the User's Guide.
[. . . ] 3-266-251-13 (1)
Portable CD Player
Operating Instructions
Owner's Record The model number is located at the rear and the serial number is located inside the lid of the CD player. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ___________________________
"WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. [. . . ] or > to select "AVLS, " then press the jog lever to enter the selection. or > to select "ON, " then press the jog lever to enter the selection.
1 2 3
While play is stopped, press DISPLAY until the display changes. or > to select "G-PRO, " then press the jog lever to enter the selection. or > to select "G-PRO 1" or "G-PRO 2, " then press the jog lever to enter the selection. If you select "G-PRO 2, " the GPROTECTION function will be enhanced compared to "G-PRO 1. " To enjoy high quality CD sound, select "G-PRO 1. "
To cancel the AVLS function Perform steps 1 - 3, changing the AVLS setting to "OFF. "
22
Stopping playback automatically (OFF TIMER)
You can set the CD player to stop playback automatically within a range of 1 to 99 minutes. While the timer function is working, ", " appears in the display of the remote control.
Locking the controls
(HOLD) You can lock the controls on your CD player to prevent accidental button presses. The OPERATION lamp flashes if you press any button when the HOLD function is activated. Slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the direction opposite to that of the arrow.
Available features
Note
Even if the HOLD function is working, "HOLD" will not appear in the display of the remote control.
1 2 3
Press DISPLAY until the display changes. or > to select "TIMER, " then press the jog lever to enter the selection. or > to select "10 min*. "
* Default setting. If you have changed the setting, the length of time already set appears.
4
Turn VOL +/ to select the length of time you want to set, then press the jog lever to enter the selection. · To increase/decrease by 5 minutes: Turn VOL +/ repeatedly. · To increase/decrease by 1 minute: Keep turning VOL +/.
To return to the previous screen Press x. To cancel the setting operation Press DISPLAY or x for 2 seconds or more. To check the length of time before the CD player stops playback During play, perform steps 1 - 3. To cancel the OFF TIMER function Perform steps 1 - 3, changing the OFF TIMER setting to "OFF. "
23
Turning off the beep sound
You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player.
About the LIGHT setting
Setting OPERATION lamp LCD backlight on the CD player on the remote control Turned off Turned off Lights up for about 5 seconds when you press a button and also lights up between tracks Lights up for about 5 seconds when you press a button
1 2 3
Press DISPLAY until the display changes. or > to select "BEEP, " then press the jog lever to enter the selection. or > to select "OFF, " then press the jog lever to enter the selection.
LIGHT OFF LIGHT 1 Lights up fully during play or during operation
LIGHT 2* Lights up with less brightness during play or during operation
* You can save power by selecting "LIGHT 2" rather than "LIGHT 1. "
To turn on the beep sound Perform steps 1 - 3, changing the BEEP setting to "ON. "
The LCD backlight on the remote control
The LCD backlight is always turned on when you are using the AC power adaptor.
Saving power
You can select lighting options for the LCD backlight on the remote control and the OPERATION lamp on the CD player so that you can save battery power.
1 2 3
Press DISPLAY until the display changes. or > to select "LIGHT, " then press the jog lever to enter the selection. [. . . ] (page 26)
Additional information
(Continued)
35
Troubleshooting Symptom During playback of an ATRAC CD or MP3 CD, the CD does not rotate but you can hear the sound normally. "NO FILE" appears on the display after you press the jog lever or when the lid of the CD player is closed. When closing the lid of the CD player, the CD starts to rotate. The LCD display becomes hard to see or slows down. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY WALKMAN D-NE10
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY WALKMAN D-NE10 will begin.