User manual SONY WALKMAN D-NF600

[. . . ] 3-266-358-83 (1) FM/AM Portable CD Player Operating Instructions Owner's Record The model number is located at the rear and the serial number is located inside the lid of the CD player. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. ___________________________ "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. [. . . ] Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "GPROTECTION, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "G-PRO 1" or "G-PRO 2, " then press DISPLAY/MENU to enter the selection. If you select "G-PRO 2, " the GPROTECTION function will be enhanced compared to "G-PRO 1. " To enjoy high quality CD sound, select "G-PRO 1. " 2 3 To cancel the AVLS function Perform steps 1 - 3, changing the AVLS setting to "OFF. " 24 Stopping playback automatically (OFF TIMER) You can set the CD player to stop playback automatically within a range of 1 to 99 minutes by one minute. While the timer function is working, " " appears at about 5second intervals*. * When Screen 1, 2 or 3 is displayed (Audio CD: when Screen 1 or 2 is displayed) (page 16) To cancel the OFF TIMER function The OFF TIMER function will be canceled: · When you perform steps 1 - 3, changing the OFF TIMER setting to "OFF. " · When you listen to the radio. Locking the controls (HOLD) You can lock the controls on your CD player to prevent accidental button presses. If you press any button when the HOLD function is activated, the OPR lamp flashes and "HOLD" also flashes in the display. Slide HOLD in the direction of the arrow. You can use the HOLD function with both the CD player and the remote control. You can still operate your CD player using the remote control when HOLD on the remote control is set to off. To unlock the controls Slide HOLD in the direction opposite to that of the arrow. 1 2 3 Press DISPLAY/MENU until the MENU screen appears. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "TIMER, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "10 min*, " then press DISPLAY/MENU. * Default setting. If you have changed the setting, the length of time already set appears. Available features 4 Turn the jog dial to select the length of time you want to set from "01 min" to "99 min", then press DISPLAY/MENU to enter the selection. To return to the previous screen Press ­ on the CD player. To cancel the setting operation Push the 5-way control key toward x. To check the length of time before the CD player stops playback During play, perform steps 1 - 3. 25 Turning off the beep sound You can turn off the beep sound that is heard from your headphones/earphones when you operate your CD player. Saving power You can select lighting options for the OPR lamp on the CD player so that you can save battery power. 1 2 3 1 2 3 Press DISPLAY/MENU until the MENU screen appears. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "BEEP, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "OFF, " then press DISPLAY/MENU to enter the selection. Press DISPLAY/MENU until the MENU screen appears. Turn the jog dial to select "OPTION, " then press DISPLAY/MENU. Turn the jog dial to select "LIGHT, " then press DISPLAY/MENU to enter the selection. Turn the jog dial to select "LIGHT OFF" or "LIGHT 2, " then press DISPLAY/MENU to enter the selection. To turn on the beep sound Perform steps 1 - 3, changing the BEEP setting to "ON. " About the LIGHT setting Setting LIGHT OFF LIGHT 1 LIGHT 2* OPR lamp Turned off Lights up fully during play or during operation Lights up with less brightness during play or during operation * You can save power by selecting "LIGHT 2" rather than "LIGHT 1. " 26 Playing tracks continuously (SEAMLESS) (ATRAC CD only) You can play live concert music, etc. [. . . ] Cause and/or corrective action c The CD player is designed to stop the rotation of an ATRAC CD or MP3 CD during playback to reduce the power consumption. c There are no ATRAC3plus/ATRAC3/MP3 files in the CD. c A CD-R/RW from which the data has been erased is being used. c The CD is dirty. c The CD player is reading the information on the CD. [. . . ]