User manual SONY WALKMAN ICF-CD555TV QUICK START

[. . . ] 3-265-481-11(1) WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Do not use liquid cleaners or aerosol cleaners. 400 × 104 × 323 mm (w/h/d) (Approx. 15 3/4 × 4 1/8 × 12 3/4 inches) incl. projecting parts and controls Mass: Approx. 4. 2 kg (9 lb 4. 2 oz) Supplied accessories: Mounting screws (4), Template (1), Spacers (4), Remote commander (1) Design and specifications are subject to change without notice. Features · · · · · Super Slim under the counter LCD-TV 7" wide-screen LCD Color panel display TV/Cable Tuner TV stereo/Auto SAP Function MEGA Xpand function to get the effect of expansion of the sound field · Easy Set, One Touch Cooking Timer · Magnetic Remote Commander Caution · Since the unit is quite heavy, be careful when installing the unit. · Hold the unit horizontally when installing it, since the CD tray may open if the unit is shaken. · To reduce the risk of fire, do not place any heating or cooking appliance beneath this unit. · Install the unit so that its AC power cord can be connected directly to a wall outlet. Do not use a converter or extension cord. · Be sure that the AC power cord has no slack when using the unit, since the cord acts as an FM wire antenna. If the AC power cord has some slack, wind up the slack on the cord hook. · The unit has a built-in ferrite bar antenna for AM radio reception. Check the condition of AM reception before fixing in position. · Install the unit as far as possible from a source of noise (for example, refrigerator, microwave oven, fluorescent lamp, etc. ). Antenna Grounding According to the National Electrical Code Antenna Lead-in Wire Ground Clamps Electric Service Equipment NEC-NATIONAL ELECTRICAL CODE Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-20) Ground Clamps Power Service Grounding Electrode System (NEC Art 250 Part H) SERVICE Damage Requiring Service Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions: -When the power cord or plug is damage or frayed. -If liquid has been spilled or objects have fallen into the appliance. -If the appliance has been exposed to rain or water. -The appliance does not appear to operate normally or exhibits a marked change in performance. -If the appliance does not operate normally when following the operating instructions, adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation. -If the appliance has been subject to excessive shock by being dropped, or the cabinet has been damaged. Servicing Do not attempt to service the appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by Sony that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check Upon completion of any service or repairs to the appliance, ask the service technician to perform routine safety checks (as specified by Sony) to determine that the appliance is in safe operating condition. The preset 3, CLOCK, VOLUME + and CD u buttons have a tactile dot. Basic Connections (Connecting Cable TV or Antenna) Connecting directly to cable or an antenna Setting the display monitor (See Fig. B) Opening the display monitor 1 Press DISPLAY RELEASE to open the 2 display monitor. [. . . ] While the buzzer sounds, the volume of the CD, radio or TV is decreased. The volume returns to the previous volume level when the buzzer stops. 3 3 4 Press TIME SET + or ­ until the correct hour appears in the display. Press CLOCK once. The minutes will flash. Adjust the volume using the VOLUME(VOL) + or - buttons. The setting value of the item selected appears in this area. BRIGHTNESS: Press TV MENU SET + to brighten the picture. [. . . ]