User manual SONY WALKMAN NW-E75

[. . . ] 3-267-071-81(1) Portable IC Audio Player Network Walkman Operating Instructions "WALKMAN" is a registered trademark of Sony Corporation to represent Headphone Stereo products. is a trademark of Sony Corporation. NW-E75 © 2004 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table cloths, curtains, etc. [. . . ] The selected display mode blinks. LapTime * Play: Displays and alternately. Fast-forward/Fast-rewind: Displays M or m. · Title: Title display mode When the music title includes more than 12 characters, the title will be automatically scrolled. 3 Rotate the Shuttle switch to select a desired display mode and press the Nx button to confirm. The display switches to the selected display mode. DISPLAY> Title/Artis · Track info: Track information display mode The track title, CODEC, and bit rate are displayed. When the information includes more than 12 characters, the information will be automatically scrolled. 4 Press the MENU button. The display returns to the normal screen. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. Title/Codec/ While searching, fast-forwarding, or fastrewinding a track, the current playing position is displayed. continued Group Mod to (+/>) e Advanced Operations 21 Changing the display mode Note The display automatically returns to the normal playback screen if you do not press any buttons for 60 seconds. Adjusting treble and bass (Digital sound preset) You can adjust the treble and bass. You can preset two settings, which can be selected during playback. Selecting the group display mode For any menu mode, you can select the group display by pressing the GROUP button. Selecting the Sound quality Default settings Sound quality Bass SOUND 1 SOUND 2 SOUND OFF (S1) (S2) (NORMAL SOUND) +1 ±0 +3 ±0 ±0 ±0 GROUP button Treble Press the GROUP button in the group mode screen. Note The display automatically returns to the normal playback screen if you do not operate any button for 30 seconds. Press and hold the REPEAT/ SOUND button for half a second. The Sound quality setting is changed as follows: S1 S2 (none) To return to the normal Sound quality Select "SOUND OFF. " 22 Group Mod To cancel the group mode e Group Mod e REPEAT/ SOUND button Adjusting the sound quality You can adjust the sound quality of bass and treble parts. Sound quality Bass Treble Emphasis level -4 to +3 -4 to +3 3 You can preset desired sound quality settings as "Sound 1" and "Sound 2. " While playing music, you can assign a preset sound quality to music. Shuttle switch Nx button Press (Confirm) Set the tone for "SOUND 1. " 1 Rotate the Shuttle switch to select "SOUND 1 >" and press the Nx button to confirm. 2 "BASS:+1" appears, rotate the Shuttle switch to adjust the emphasis level of bass sound and press the Nx button to confirm. 3 "TREBLE: 0" appears, rotate the Shuttle switch to adjust the emphasis level of treble sound and press the Nx button to confirm. Press the MENU button The display returns to the normal screen. Advanced Operations 4 to (+/>) To adjust the "SOUND 2" setting Mod e Select "SOUND 2" in step 3. to (. /­) ode MENU button 1 Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select "SOUND >" and press the Nx button to confirm. SOUND:2> Group To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. 23 Locking the controls (HOLD) You can protect your Network Walkman against accidental operation by using the HOLD function when carrying it. Storing non-audio data You can transfer data from the hard disk of your computer to the built-in flash memory using Windows Explorer. The built-in flash memory is displayed in Windows Explorer as an external drive (for example: as the D drive). Notes · You cannot operate the SonicStage software while operating the data storage function of your Network Walkman to use files stored in the builtin flash memory. The error message "Cannot access the Device/media. " will be displayed when you try to operate both of them simultaneously. · If you store a lot of non-audio data into the builtin flash memory, the space for audio data is reduced by the same amount. Slide the HOLD switch in the direction of the arrow. All operation buttons are disabled. If you press buttons while the HOLD switch is on, "HOLD" blinks in the display. To release the HOLD function Slide the HOLD switch in the opposite direction of the arrow. 24 Group Mod e HOLD switch B Adjusting the settings of your Network Walkman 1 Adjusting the time setting of your Network Walkman to a computer's built-in clock If the function is set to "ON, " the time setting of your Network Walkman is automatically adjusted to the computer's built-in clock when your Network Walkman is connected and audio file transferring is executed (the SonicStage software must be started). You cannot play a song with a limited playing period without the time setting of your Network Walkman. To set the date and time on your Network Walkman, refer to "Adjusting the current time setting (DATE-TIME)" on page 26. Shuttle switch Nx button Press (Confirm) Press the MENU button. The menu screen is displayed. REPEAT MODE> 2 Rotate the Shuttle switch to select "PC CLK:" and press the Nx button to confirm. PC CLK:ON Adjusting the settings of your Network Walkman 3 4 Rotate the Shuttle switch to select "OFF" and press the Nx button to confirm. Press the MENU button The display returns to the normal screen. To change the setting to "ON" Select "ON" in step 3. To cancel the menu mode Select [RETURN] in the menu screen or press the MENU button. to (. /­) ode MENU button Changing the setting to "OFF" The time setting of your Network Walkman does not change even when your Network Walkman is connected to a computer. Group Mod to (+/>) e 25 Adjusting the current time setting (DATE-TIME) You can set and display the current time. You can also adjust the time setting of your Network Walkman to a computer's built-in clock by connecting your Network Walkman to the computer (page 25). Shuttle switch Nx button Press (Confirm) 3 Rotate the Shuttle switch to adjust the "year" setting and press the Nx button to confirm. The "month" digit blinks. 2004y 1m 1d 4 As you did in step 3, adjust the settings for "month" and "date. " After rotating the Shuttle switch to adjust the "date" setting and pressing the Nx button to confirm, the display switches to the time setting screen. 0:00 to (+/>) to (. /­) ode MENU button 1 Press the MENU button. [. . . ] It does not guarantee conversion among other media. OpenMG Copyright protection technology that securely manages music content from the EMD/Audio CD on a personal computer. Application software that is installed on the computer encrypts the digital music content when recording on the hard drive. This allows you to enjoy music content on the computer, but prevents unauthorized transmission of this content across a network (or elsewhere). This PC copyright protection complies with "MagicGate", and allows you to transfer digital music content from a PC's hard drive to a compliant device. Other Information SonicStage Copyright protection technology that securely manages music content from the EMD/Audio CD on a personal computer. [. . . ]