User manual SONY WEGA KLV-30XBR900

[. . . ] 4-093-894-11 (1) LCD Color TV KLV30XBR900 LCD Color TV Operating Instructions KLV30XBR900 2003 Sony Corporation WARNING To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. Note on Caption Vision This television receiver provides display of television closed captioning in accordance with §15. 119 of the FCC rules. Note to CATV System Installer CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Use of this television receiver for other than private viewing of programs broadcast on UHF or VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. [. . . ] Press repeatedly to step through the Wide Mode settings: Wide Zoom, Normal, Full, Zoom. For details, see page 62. 7 WIDE 8 (Twin View) If FUNCTION is switched on SAT/CABLE GUIDE* Press to display the program guide of your satellite program provider. 9 ANT Press to switch between the sources connected to the TV's VHF/UHF and AUX inputs. If FUNCTION is switched on SAT/CABLE INDEX* Press to display the index of your satellite program provider. 0 VOL +/­ Press to adjust the volume. qa MENU qs Power Buttons qd TV/VIDEO Press to display the Menu. SAT/CABLE*: Press to turn on and off the satellite receiver or cable box. Press repeatedly to cycle through the video equipment connected to the TV's video inputs. * If not Sony brand, requires that you first program the remote control (page 54). 52 Button Description qf 0 - 9 ENTER qg RESET Press 0 - 9 to select a channel; the channel changes after 3 seconds. Press ENTER to change channels immediately. Press to reset the settings to the factory defaults. Also used to clear Favorite Channels (see page 65). If FUNCTION is switched on DVD/VCR z REC qh FAVORITES qj FREEZE Press together with H to record. Press to display the Favorite Channels list. For details, see "Using the Freeze Function" on page 66. Press V v B b to move the on-screen cursor. To select an item, press . qk Remote Control If FUNCTION is switched on SAT/CABLE or DVD/VCR Transport Buttons m Rewind H Play x Stop M Fast forward ql MEMORY STICK w; MTS/SAP X Pause Press to display the Memory Stick Menu. For details, see "Using the Memory Stick Picture Viewer" on page 68. Press repeatedly to cycle through the Multi-channel TV Sound (MTS) options: Stereo, Auto SAP, and Mono. For details on each option, see page 80. To scan quickly through channels, press and hold down either CH. wa CH +/­ 53 Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment Programmable Code Number Beta, Ed Beta VCRs 8 mm VCR VHS VCR DVD player 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedure to program the remote control. The equipment must have infrared (IR) remote capability in order to be used with the remote control. 1 Turn to the list of "Manufacturer's Codes" on page 55, and find the Remote Control three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first. ) 2 Press FUNCTION repeatedly until the DVD/VCR or SAT/CABLE indicator lights up. 3 While the desired indicator is lit, enter the three-digit manufacturer's code number. 4 Press ENTER. You must do step 4 within 10 seconds of step 3, or you must redo steps 3 through 4. 5 To check if the code number works, aim the TV's remote control at the equipment and press POWER that corresponds with that equipment. If not, try using another code listed for that manufacturer. Notes s If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. s If you enter a new code number, the code number you previously entered at that setting is erased. s In some cases, you may not be able to operate your equipment with the supplied remote control. [. . . ] If already set to Stereo, switch to Mono (which may reduce background noise during weak stereo broadcasts). If the Speaker option is set to Off and the Audio Out option is set to Fixed (in order to output the sound to your audio system) use your audio receiver to adjust the sound (see page 81). Or, to use the TV remote control, set the Audio Out option to Variable. To turn on the TV speakers, set the Speaker option to On (see page 81). Cannot gain enough volume when using a cable box Sound seems weak or insufficient s s Cannot raise the volume on external speakers s s Channels Problem Possible Remedies Cannot receive upper channels s (UHF) when using an antenna s TV is fixed to one channel s s Cannot receive any channels when using cable TV Cannot receive or select channels s s s Change the Cable option to Off (see page 84). [. . . ]