User manual SONY WM-EX600

[. . . ] If there is noise between the tracks, these functions may not recognize the blank and may not operate. Likewise, if there is a low-level segment within a track, these functions may recognize it as a blank space. Play the other side Attach the battery case and connect the AC power adaptor (AC-E15L for Japan or AC-E15HG for other countries; not supplied) to the DC IN 1. [. . . ] 5 V jack of the battery case and to the wall outlet. specifications for AC-E15HG varies for each area. Check your local voltage and the shape of plug before purchasing. To play a tape recorded with Dolby* B NR system set DOLBY NR to ON. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Jog the jog lever upward/ downward repeatedly until "r" flashes on the sound emphasis of your choice: RV (Revive): emphasizes treble sound MB (Mega Bass): emphasizes bass sound (moderate effect) GRV (Groove): emphasizes bass sound (strong effect) NORM: normal (no effect) Press the jog lever to enter. You will hear a short beep and "r" will appear for a few seconds. Insert the supplied rechargeable battery (NH14WM) into the charger with correct polarity. plug in the charger to the house current (mains). If the sound becomes distorted with the GRV effect, select MB or NORM. You cannot enter the menu mode during fast-forwarding or rewinding. â· You cannot operate the tape while you are in the menu mode. When you press the jog lever to enter, or if you leave the remote control unoperated for more than 30 seconds, the display will exit the menu mode automatically. To Playback Play the other side Press OPR (beeps in the headphones) Once For more than a second during playback (Switching to side A: one short beep/ Switching to side B: two short beeps) Once (One short beep) Twice during playback (One short beep, then repeated sets of a short beep and a long beep) Slide the PUSH OPEN slide lock to release the cassette compartment cover. Make sure the HOLD function is turned off. Then adjust the volume with VOL on the remote control. If the earphones do not fit to your ears or the sound is unbalanced, turn round the earphones a little to fit to your ears firmly. Play the current Three times during playback track (AMS (One short beep, fucntion) then repeated sets of two short beeps and a long beep) Repeat the current track (Repeat Single Track function) Four times during playback (Repeated sets of a short beep, a long beep and a short beep when rewinding) If the sound becomes distorted when using bass emphasis and the AVLS function together, turn down the volume on the remote control. [. . . ] Play the current Three times during playback track (AMS (One short beep, fucntion) then repeated sets of two short beeps and a long beep) Repeat the current track (Repeat Single Track function) Four times during playback (Repeated sets of a short beep, a long beep and a short beep when rewinding) If the sound becomes distorted when using bass emphasis and the AVLS function together, turn down the volume on the remote control. When the tape is playing, the cassette holder is locked and you cannot slide the PUSH OPEN slide lock. Repeat the above so that "r" disappears on the playback mode to be adjusted. [. . . ]