User manual SONY WM-FS495

[. . . ] Please consult with your local authority. · Do not use the unit while it is charging. Remove the unit from the charging stand when using it. ­ If you operate the unit while it is charging, the battery will not be charged. ­ If you operate the unit while it is charging, this may cause a malfunction. [. . . ] 2 Press RADIO ON/BAND repeatedly to select AM or FM. 3 Press MENU on the main unit repeatedly and set the cursor in the display to TUNE MODE. 4 For manual tuning 1 Press SET to choose MANUAL. 2 Press TUNE/PRESET + or ­ repeatedly to tune in to the desired station. Hold down TUNE/ PRESET + or ­ for a few seconds to scan for stations. For preset tuning 1 Press SET to choose PRESET. 2 Press TUNE/PRESET + or ­ repeatedly to recall the desired preset station. To use preset tuning, preset stations first (see "Presetting Radio Stations"). To turn off the radio Terminals Presetting Radio Stations E You can preset up to 30 stations-- 20 for FM and 10 for AM (for the JPn area*, up to 16 stations--8 for FM and 8 for AM). * Only if available. See "Receiving Stations Outside Your Country/ Region". 5 While the preset number is flashing, select the preset number you want using TUNE/PRESET + or ­ and press ENTER. Notes · If you cannot complete step 4 or 5 while the indicators are flashing, repeat from step 3. · If a station is already stored, the new station replaces the old one. Receiving Stations Outside Your Country/ Region (Excluding European, Saudi Arabian, and Chinese models) 1 Press RADIO ON/BAND to turn on the radio. The frequency digits will flash in the display. 4 Press TUNE/PRESET + or ­. To cancel a stored station 1 Follow the procedure above and in step 4, select the preset number you want to cancel and then press ENTER. The frequency digits will flash in the display. 2 Press and hold TUNE/PRESET + or ­. The frequency digit starts running up or down. Keep holding down the button until "- - - -" is displayed. 3 Press ENTER while "- - - -" is flashing. A preset number will flash in the display. 4 Press ENTER to cancel the stored station. Preventing hearing damage Do not use headphones/earphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce volume or discontinue use. F On charging · The supplied charging stand can be used only with this unit. No other model can be charged using this stand. [. . . ] + (fast) to play back at a faster speed. On AC power adaptor · Use only the supplied AC power adaptor (for charging stand). Do not use any other AC power adaptor. Terminals Scanning the Preset Radio Stations -- DAPS (Digital Auto Preset Scanning) 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND repeatedly to select AM or FM. 3 Press and hold RADIO ON/BAND for 2 seconds or more. [. . . ]