User manual SONY WM-FX277

[. . . ] Supplied accessories Stereo headphones or Stereo earphones (1) Carrying case with belt clip (1) Design and specifications are subject to change without notice. Do not leave the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or sand, moisture, rain, mechanical shock, or in a car with its windows closed. [. . . ] This will allow you to hear outside sounds and to be considerate to the people around you. 1 Slide open the battery compartment lid, and insert two R6 (size AA) dry batteries with correct polarity. Replace the batteries with new ones when " flashes in the display. To clean the tape head and path, use the cleaning cassette CHK-1W /C-1KW (not supplied) every 10 hours of use. To clean the exterior, use a soft cloth slightly moistened in water. Remove the batteries for 30 seconds or more, and then insert them again. If this does not solve the problem, remove the batteries and leave the unit without batteries for 30 minutes or more, and then insert them again. In this case, preset the stations again, since the preset stations are erased from the memory. 3 While the frequency digits and the preset number are flashing, tune in to a station you wish to store using TUNING+/­, and select a preset number using PRESET+/­. If you cannot complete step 3 or 4 while the indications are flashing, repeat from step 2. [. . . ] 3 If you wish to preset the received station, press ENTER while the preset number is flashing. The received station is preset on preset number 1 and the unit starts scanning for the next receivable station. [. . . ]