User manual SONY WM-GX808

[. . . ] Note Tapes recorded with setting to " cannot be played " properly on a cassette player/ tape recorder without this function. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. ⷠCertain countries may regulate disposal of the battery used to power this product. [. . . ] The number will increase when playing back the FWD side, and decrease when playing back the REV side. The tape counter may show some deviation. ⷠThe tape counter will not be displayed when the cassette compartment is empty. You can monitor the recording sound through headphones/ earphones. Note You may hear some noise in the monitor sound in the RV, MB, or GRV mode (see "Using the Menu"), but this does not affect recording. Sound emphasis (RV, MB, or GRV) and AVLS settings do not affect recording. ⷠActual recording will start about 2 seconds (3 seconds when " " is selected for recording time) after you slide the REC button. Slide the REC button about 2 seconds (3 seconds when " " is selected for recording time) before the moment you want to start recording, or you will miss the beginning of your recording. A-B Repeat plays back repeatedly any portion of the tape you specified. Specify by tagging the beginning (point A) and the end (point B) of the portion during playback. Play the other side from the beginning (Skip Reverse function) Play the same side from the beginning (Rewind Auto Play function) To record on one side only Insert the cassette with the side to be recorded on as the REV (reverse) side**. **Make sure that "REV" is displayed. If not, press and hold x until "FWD" changes to "REV". REPEAT for 2 seconds or more during playback to tag point A. Then "REP" appears in the display and the specified portion is played repeatedly. Then " press SET to select " or none (normal speed). Hold down TUNE/ PRESET + or ­ for a few seconds to scan for stations. To use preset tuning, preset stations first (see "Presetting Radio Stations"). 5 While the preset number is flashing, select the preset number you want using TUNE/PRESET + or ­ and press ENTER. notes · If you cannot complete step 4 or 5 while the indicators are flashing, repeat from step 3. ⷠIf a station is already stored, the new station replaces the old one. Preset number 1 will flash in the display and the main unit starts scanning the stations from the lower frequencies and stops for about 5 seconds when a station is received. [. . . ] This is to prevent accidentally pressing the button on the main unit and activating other functions. You can listen to a particular phrase and then your recorded voice, one after the other repeatedly. This will allow you to hear outside sounds and to be considerate to the people around you. 4 oz) (main unit only) Supplied accessories AC power adaptor (1) Battery case (1) Stereo headphones or earphones with remote control (1) Charging stand (1) Rechargeable battery (NH-14WM(A), 1. [. . . ]