User manual SONY WM-GX822

[. . . ] Use the Sony NC-6WM rechargeable battery only with the supplied battery charger or with the separately sold battery charger for Sony NC-6WM. When you carry it with you, use the supplied carrying case. If you do not use the carrying case, do not carry with other metallic objects such as keys in your pocket. The battery charger and the rechargeable battery may become warm during charging, but it is not a problem. [. . . ] Then the FM frequency and "PRESET 1" will light up in the display of the unit and "1" will light up on the remote display. Press PRESET+/­ to select the preset number you wish to listen to and adjust the volume using the volume dial. Next time you listen to the radio in the same frequency area, you can skip step 3. to improve radio reception When you are listening to FM or TV, extend the ear receiver cord for better reception. When you are listening to AM, rotate the unit horizontally for optimum reception. TIME/TUNE ­ /SLOW or +/FAST for more than a few seconds, the Walkman will start tuning the stations automatically. When you are listening to stereo broadcast While the frequency digits, "PRESET" and the preset number are flashing, tune in to a station you wish to store using SPEED CONTROL · TIME/TUNE, and select a preset number on which you wish to store a station using PRESET+/­. While the frequency digits, "PRESET" and the preset number are flashing, press ENTER. What the ASP button does ASP (Auto Station Preset function) This Walkman stores the main stations of eight areas of Japan (Sapporo, Sendai, North Kanto, South Kanto, Nagoya, Osaka, Hiroshima, and Fukuoka) and Shinkansen. You can tune in the originally stored stations by simply pressing ASP. Keep pressing the ASP button until the Walkman start to search. If the ASP function does not store the desired station, or you want to customize the preset number of the stations, see "Tuning in the Radio Manually" or "Storing Radio Stations Manually" as following. If you cannot complete step 3 or 4 while the indications are flashing, repeat from step 2. If you preset automatically using ASP, the stations stored will be erased. Operate the unit according to the steps in Storing Radio Stations Manually and Receiving the Stations from step 1 to step 3. Then press ENTER while "----" is flashing. Press and hold ASP until "1" changes to "A" in the display. Insert a normal (TYPE I) tape with the side facing forward you want to record on. select a recording source: To record with the microphone Connect the supplied microphone to the MIC jack. You can use the supplied microphone stand. [. . . ] The EL display will glow for about 5 seconds for each press. Break off the tabs from side A and/or B. To reuse the tape for recording, cover the tab hole with adhesive tape. Do nopt use a CrO2 (TYPE II) or metal (TYPE IV) tape, otherwise the sound may be distorted when you play back the tape, or the previous recording may not be erased completely. [. . . ]