User manual SONY WM-AF65

[. . . ] To playback commercially available music tape, etc. , select normal (no indication). 3 Press Y·REPEAT on the main unit and adjust the volume with VOL. (On the remote control, press Y(play)·x(stop). ) When adjusting the volume on the remote control Set the VOL control on the main unit to around 6. When adjusting the volume on the main unit Set the VOL control on the remote control at maximum. To Play the next track/ succeeding 9 tracks from the beginning (AMS**) Play the current track/previous 8 tracks from the beginning (AMS**) Play the other side from the beginning (Skip Reverse function) Play the same side from the beginning (Rewind Auto Play function) Press FF/CUE (FF + on the remote control) once/ repeatedly during playback REW/REVIEW (REW ­ on the remote control) once/repeatedly during playback FF/CUE (FF + on the remote control) for 2 seconds or more during stop REW/REVIEW (REW ­ on the remote contorl) for 2 seconds or more during stop · A-B Repeat stops automatically after repeating 50 times. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. * There is a tactile dot beside VOL on the main unit to show the direction to turn up the volume. ** The button or jack has a tactile dot. To stop the A-B Repeat playback Press Y·REPEAT on the main unit. On the remote control, press Y·x. Rewind* To reset A-B Repeat When you want to change a specific portion, stop the A-B Repeat playback and tag point A and point B again. Notes · You cannot specify a repeat portion that includes both sides of the tape. · You cannot specify a repeat portion shorter than 2 seconds. · After repeated operation, the actual portion that is played back may shift somewhat from the exact portion specified with the tags due to tape slack. D AC-E15HG (not supplied) Search forward during playback (CUE) DC IN 1. 5 V Search backward during playback (REVIEW) 2 Press MENU repeatedly to set the cursor in the display to REC/PB. 3 Press MENU repeatedly to set the cursor in the display to TUNE MODE. Then press SET to display "PRESET". 4 Press TUNE/PRESET + or ­. To cancel a stored station 1 Follow the procedure above and in step 4, select the preset number you want to cancel and then press ENTER. The frequency digits will flash in the display. 2 Press and hold TUNE/PRESET + or ­. The frequency digit starts running up or down. Keep holding down the button until "- - - -" is displayed. 3 Press ENTER while "- - - -" is flashing. A preset number will flash in the display. 4 Press ENTER to cancel the stored station. Receiving Stations Outside Your Country/ Region (Excluding European, Saudi Arabian, and Chinese models) 1 Press RADIO ON/BAND to turn on the radio. The frequency digits will flash in the display. [. . . ] To select the band, press RADIO ON/BAND·OFF for more than 1 second while the radio is on. To tune in or recall a preset station, press FF + or REW ­. To turn off the radio, press RADIO ON/BAND·OFF. Presetting Stations Manually 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND repeatedly to select AM or FM. [. . . ]