User manual SONY WM-FX890

[. . . ] 3-259-100-41(1) A D Radio Cassette Player Operating Instructions FWD (forward) side REV (reverse) side WM-FX890 ©2003 Sony Corporation Printed in Malaysia Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink. · To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. · To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. · Certain countries may regulate disposal of the battery used to power this product. [. . . ] For preset tuning 1 Press SET to choose PRESET. 2 Press TUNE/PRESET + or ­ repeatedly to recall the desired preset station. To use preset tuning, preset stations first (see "Presetting Radio Stations"). To turn off the radio Terminals Presetting Radio Stations E You can preset up to 30 stations-- 20 for FM and 10 for AM (for the JPn area*, up to 16 stations--8 for FM and 8 for AM). * Only if available. See "Receiving Stations Outside Your Country/ Region". 5 While the preset number is flashing, select the preset number you want using TUNE/PRESET + or ­ and press ENTER. Notes · If you cannot complete step 4 or 5 while the indicators are flashing, repeat from step 3. · If a station is already stored, the new station replaces the old one. Receiving Stations Outside Your Country/ Region (Excluding European, Saudi Arabian, and Chinese models) 1 Press RADIO ON/BAND to turn on the radio. The frequency digits will flash in the display. 3 Press and hold RADIO ON/BAND until "Eur", "USA" or "JPn" flashes. 4 Press RADIO ON/BAND repeatedly to select "Eur", "USA" or "JPn" and press ENTER. 5 Tune in to and store stations as necessary following the procedure of "Listening to the Radio" and "Presetting Radio Stations". Area indication and frequency range Area* Frequency range FM (MHz) AM(kHz) Eur USA JPn 87. 5 - 108 87. 5 - 108 76. 0 - 90. 0 531 - 1 602 530 - 1 710 531 - 1 710 GRV : Groove Emphasizes bass sound (strong effect). no message : normal (no effect) On the main unit: Precautions For the customers in the USA and Canada RECYCLING NICKEL METAL HYDRIDE BATTERIES Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800822-8837, or visit http://www. rbrc. org/. Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries. On headphones/ earphones Road safety Do not use headphones/earphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your headphones/earphones at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations. Specifications Radio section Frequency range FM: 76. 0 - 90. 0 MHz (Japan) 87. 5 - 108 MHz (other countries/regions) AM: 531 - 1 710 kHz (Japan) 530 - 1 710 kHz (North, Central, and South America) 531 - 1 602 kHz (other countries/regions) RADIO ON/ BAND · OFF 1 Press MENU repeatedly to set the cursor in the display to SOUND. 2 Press SET repeatedly to select the sound emphasis of your choice. Note If the sound is distorted with the mode "GRV", turn down the volume of the main unit or select other modes. Tape section Frequency response Playback: 40 - 15 000 Hz Output Headphones (i) jack Load impedance 8 - 300 Presetting Automatically Scanned Stations 1 Press RADIO ON/BAND to turn on the radio. 2 Press RADIO ON/BAND repeatedly to select AM or FM. 3 Press and hold ENTER for more than 3 seconds. Preset number 1 will flash in the display and the main unit starts scanning the stations from the lower frequencies and stops for about 5 seconds when a station is received. When you carry it with you, use the supplied carrying case. If you are not using the case, do not carry the battery with other metallic objects such as keys, rings in your pocket. [. . . ] The preset stations of the selected band will be played for about 5 seconds each. (During DAPS the indicators in the display flash. ) 4 Press RADIO ON/BAND again to select the station while the desired preset station is being played. Notes · If there are no stations stored, the DAPS function does not work. · Until a station is selected in step 4, the DAPS function turned on in step 3 will continue. Press MODE repeatedly. With each press, the indications change. On the main unit: To operate from the remote control To turn on the radio, press RADIO ON/BAND·OFF for more than 1 second (while the tape is in stop mode only). [. . . ]