User manual SONY WX-C570R

[. . . ] With Optional Equipment CD/MD unit Playing tracks in random order -- Shuffle Play . Listening to each program source in its registered surround mode -- Source Sound Memory (SSM) . The buttons of the wireless remote work the same functions as those on this unit. 1 OFF button 2 SEEK/AMS button 3 (­) (+) buttons 4 MUTE button 5 SOUND button 6 DSPL button 7 PRESET/DISC button You cannot do manual search and manual tuning with the remote. [. . . ] To go back to normal mode, select "Mono off" in step 2 above. To return to normal radio reception, press (LIST) for two seconds. Each time you press (DSPL), the item changes as follows: Tip To erase/correct a name, enter "_" (under-bar) for each character. Each time you press (DSPL), the item changes as follows: Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. Note After the station name or frequency has been displayed for five seconds, the display goes back to normal mode. Once you have registered the desired the sound characteristics (equalizer and subwoofer) onto a disc, you can enjoy the same surround menu every time you play that disc. You can register them of a maximum of 50 discs. Press (SHIFT), then press (9) (P MODE) repeatedly until "DSM set" appears. Adjust within three seconds after selecting the item. (After three seconds, the dial functions work as the volume control. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name) *3 If the track name of a CD TEXT disc or MD is not prerecorded, "NO T. After the mode setting is complete, the display goes back to normal playback mode. You can label a personalized name for CDs and CD TEXT discs with the disc memo function, refer to "Labeling a CD" (page 21). Tip If the name of the MD or CD TEXT disc is too long, you can scroll it across the display window by pressing (SCRL) while the disc name or track name is displayed. The disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). ⷠThe disc or track name appears depending on the setting when you press (CD/MD) to select an MD or CD TEXT disc. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. [. . . ] if the fuse blows , check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. You can control this unit with the optional rotary commander (RM-X2S). Some labels are supplied with the rotary commander. [. . . ]