User manual SONY WX-C770

[. . . ] This unit lets you enjoy a variety of features by using either an optional rotary commander or an optional wireless remote. In addition to the CD playback and radio operations, you can expand your system by connecting an optional MD/CD unit. *1 If you operate this unit or connect an optional CD changer with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc. *2 *1 You can connect to CD changer, MD changer, CD player and MD player. [. . . ] Press (6) (ENTER) for two seconds in step 2 of "Registering a surround menu onto each disc. After three seconds, the display goes back to the normal playback mode. You can create and store up to three equalizer curves (User 1 to User 3). Tip When you rotate the dial to turn the volume all the way down, "Sub. Listening to each program source in its registered surround mode -- Source Sound Memory (SSM) You can listen to the same source always in the same equalizer curve and subwoofer level even after changing the program source or turning the unit on and off again. You can select from nine equalizer curves. The sound signal level is displayed on a 13 band spectrum analyzer. You can select from 23 display patterns or you can choose no display (SA off). After three seconds, the display goes back to the normal playback mode. You can select from three kinds of spectrum analyzer levels (High, Middle, Low). During playback, press (SA) for two seconds. Each time you press (SA) for two seconds, the displayed item changes as follows: --Select "Auto" to dim the display only when you turn the lights on. Loud (Loudness) to enjoy bass and treble even at low volume. Disc MEMO/TEXT name (Disc memo/CD TEXT name) to set the priority display item when you connect an optional CD changer with the CD TEXT and disc memo function (page 9, 22). This unit can control a maximum of seven external CD/MD units in this configuration: -- CD unit - maximum of five -- MD unit - maximum of five If you connect an optional CD changer with the CD TEXT function, the CD TEXT information will appear in the display when you play back a CD TEXT disc. When a MD/CD unit is connected, all the tracks play from the beginning. Press (DSPL) for two seconds during MD playback. The recording date of the track is displayed for about three seconds. To go back to normal playback mode, select "Intro off" in step 2 above. During playback, press either side of (SEEK/AMS) once for each track you want to skip. â· Repeat 2 to repeat a disc. â· Repeat 3 to repeat all the discs in the current unit. [. . . ] Attach labels to match the functions of the master unit according to the position of the rotary commander. When you mount the rotary commander, attach the label as in the illustration below. Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Outputs Line outputs (2) Sub output Power antenna relay control lead Power amplifier control lead 12 V DC car battery (negative ground) Approx. [. . . ]