User manual SONY XBR-65HX950

[. . . ] D:\TV's JOB\SONY TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US01COV. fm 4-411-986-12(1) LCD TV Operating Instructions (Setup Guide) Sony Customer Support U. S. A. : http://www. sony. com/tvsupport Canada: http://www. sony. ca/support United States 1. 800. 222. SONY Canada 1. 877. 899. SONY Please Do Not Return the Product to the Store XBR-65HX950 / 55HX950 KDL-55HX850 / 46HX850 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\SONY TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US02REG. fm Owner’s Record The model and serial numbers are located at the side and rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. Model Name Serial No. • When using the simulated 3D function, please note that the displayed image is modified from the original due to the conversion done by this television. Licensing Information HDMI, the HDMI Logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ] ~ • You will need to contract with an Internet service provider to connect to the Internet. Preparing a wireless LAN The built-in wireless LAN device allows you to access the Internet and your home network. With this feature, you can connect to a wireless LAN and enjoy the benefits of networking in a cable-free environment. Before setting up the wireless LAN function of the TV, be sure to set up a wireless LAN router. TV Wireless router Modem Getting Started Preparing a wired network TV Internet Internet Modem with router functions or Router Modem Internet ~ • For LAN connections, use a Category 7 cable (not supplied). 19 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\SONY TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US03STU. fm 7: Running initial setup 4 ~ • Home mode sets the TV to settings optimized for home viewing (this setting is ENERGY STAR compliant). Select Continue to scan for available channels and enable the Rovi On Screen Guide™ feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV’s built-in tuner, select Skip. Selecting Skip will disable the Rovi On Screen Guide feature, which is only available when the TV’s tuner is used. ~ • If you skip the channel scan while in the setup menus, Rovi On Screen Guide will be disabled. 1 2 Complete your cable connections before proceeding with the Initial Setup. Connect the TV to your nearest power outlet. The = (power) indicator will light up in green. When you switch on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV for the first time, the TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the timer indicator on the front of the TV blinks orange for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory for some TVs. 5 Set up the Internet settings. Select Auto to connect to the network automatically. If you do not access the Internet, or to set up later, select Skip. ~ • If you use WEP security, select Custom t Wireless Setup t Scan. Then, select the network name (SSID) you want to connect. If you cannot find the required network name, select [Manual Entry] and press to enter network name. • Use the optional USB Wireless LAN Adapter to connect with your wireless router (or access point) at 5GHz. Insert USB Wireless LAN Adapter and set Standby for Wi-Fi Direct to Off. Press HOME, then select Settings t Network t Standby for Wi-Fi Direct t Off. [. . . ] The TV should also be placed on a stable surface to prevent it from toppling over (see page 16). If you have young children or pets at home, check regularly to ensure the TV is securely fastened. 34 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\SONY TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US06OPT. fm Specifications System Television system NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 LCD (Liquid Crystal Display) Panel 10 W + 10 W + 10 W 75-ohm external terminal for RF inputs Video / Audio input (phono jacks) YPBPR (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i Audio input (phono jacks) Video input (common phono pin with Y input) Video (2D): 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p, 480i, PC Formats Video (3D): Frame Packing 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p Side-by-Side 1080p (60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) Over-Under 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) Audio: Two channel linear PCM: 32, 44. 1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital Analog audio input (stereo mini jack) (HDMI IN 2 only, common with PC IN) ARC (Audio Return Channel) (HDMI IN 1 only) Stereo mini jack Digital optical jack (Two channel linear PCM, Dolby Digital) Sound output for TV stand Analog RGB (Mini D-sub 15-pin) Audio input (stereo mini jack) (common with HDMI IN 2) 10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV. ) Refer to the i-Manual for supported format. Channel coverage Panel system Speaker output Input/Output jacks CABLE/ANTENNA VIDEO IN 1 COMPONENT IN VIDEO IN 2 HDMI IN 1/2/3/4 AUDIO OUT/Headphones DIGITAL AUDIO OUT (OPTICAL) Speaker Integrated Stand (KDL-55/46HX850 only) PC IN PC/HDMI 2 AUDIO IN LAN USB/DLNA Model name XBR-/KDLPower and others Power requirement Power in use consumption in DAM*1 in standby Screen size*2 (inches measured diagonally) Display resolution Dimensions*2 with stand (mm) (inches) without stand (mm) (inches) wall-mount hole pattern (mm) wall-mount screw size (mm) with stand Mass*2 (kg)/(lb. ) without stand (kg)/(lb. ) Supplied accessories 65HX950 55HX950 55HX850 46HX850 110-240 V AC, 50/60 Hz (U. S. A. /Canada 120 V AC, 60 Hz) 252 W 190 W 147 W 119 W 0. 02 kWh/Day (You may hear a clicking noise during the download but this is normal. ) Less than 0. 2 W with 120 V AC and less Less than 0. 15 W with 120 V AC and less than 0. 35 W with 240 V AC than 0. 3 W with 240 V AC 64. 5 inches 54. 6 inches 46 inches (65 class) (55 class) 1, 920 dots (horizontal) × 1, 080 lines (vertical) 1, 506 × 965 × 374 1, 280 × 829 × 369 1, 274 × 808 × 341 1, 077 × 697 × 268 59 3/8 × 38 × 14 3/4 50 1/2 × 32 3/4 × 14 5/8 50 1/4 × 31 7/8 × 13 1/2 42 1/2 × 27 1/2 × 10 5/8 1, 506 x 901 x 51 1, 280 x 773 x 49 1, 274 x 750 x 35 1, 077 × 640 × 35 59 3/8 × 35 1/2 × 2 1/8 50 1/2 × 30 1/2 × 1 15/16 50 1/4 × 29 5/8 × 1 7/16 42 1/2 × 25 1/4 × 1 7/16 400 × 300 300 × 300 M6 (length: see diagram on page 21. ) 47. 7 / 105. 1 43. 6 / 96. 1 29. 6 / 65. 2 26. 7 / 58. 9 26. 2 / 57. 8 21. 7 / 47. 8 20. 3 / 44. 8 16. 6 / 36. 6 Additional Information See page 8 (Checking the accessories). (Continued) 35 XBR-65HX950/55HX950/KDL-55HX850/46HX850 4-411-986-12(1) D:\TV's JOB\SONY TV\SY120099_B6 (Rev-2)\Group B6 (Rev2)\4411986121\4411986121\US06OPT. fm Model name XBR-/KDLOptional accessories 65HX950 55HX950 55HX850 46HX850 Operating temperature Connecting cables Support Belt Kit Wall-Mount Bracket: SU-WL500 TV Stand: SU-B553S (KDL-55HX850 only) SU-B463S (KDL-46HX850 only) 3D Glasses: TDG-BR750/TDG-BR250/TDG-BR200/TDG-BR100/TDG-BR50 Camera and Microphone Unit: CMU-BR100 USB Wireless LAN Adapter: UWA-BR100 32 ºF – 104 ºF (0 ºC – 40 ºC) *1 Download Acquisition Mode (DAM) is used for software updates and/or collecting data for Rovi On Screen Guide. *2 Screen size, dimensions and mass are approximate values. • Optional accessories availability depends on countries/region/TV model/stock. [. . . ]